Hand Crimp Short Adjuster - 1/8" Wire x 1/4" Pin
Generally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.
• Knurled nut for adjustment
• Hex locking nut
• 1" adjustment
• Hand crimp
Heavy on the technical side...
Hand Crimp terminals, when properly applied, are approximately 65% - 70% the strength of 7 x 7 stainless steel wire.
While this has proven adequate for use in lifelines, these fittings should not be used for standing rigging or other high load applications.
For correct attachment, manufacurer's instructions must be followed.