Coosa Composites
Nautical 15 Series Marine Board

Continous Strand Fiberglass Reinforcement

Nautical 15 is a polyurethane foam board reinforced with layers of continuous strand fiberglass. Nautical 15 is Coosa's highly-economical, lightest weight glass-reinforced panel. It is typically used as a filler, or low-stress semi-structural component.
• Density of 15 pounds per cubic foot
• Will not rot; extremely low water absorption
• Dimensionally stable
• Attach with screws, staples or adhesives
• 61% or more lighter ...

Coosa Composites
Nautical 20 Series Marine Board

Continuous Strand Fiberglass Reinforcement

Nautical 20 is a medium-density, polyurethane foam board reinforced with layers of continuous strand fiberglass. It is a lighter weight, economical alternative to the Nautical 24, and can be used as a direct replacement for plywood.
• Density of 20 pounds per cubic foot
• Will not rot; extremely low water absorption
• Dimensionally stable
• Attach with screws, staples or adhesives
• 45% or more lighter than a comparable ...

Coosa Composites
Nautical 24 Series Marine Board

Continuous Strand Fiberglass Reinforcement

Nautical 24 is a high-density, polyurethane foam board reinforced with layers of continuous strand fiberglass. It is used as a direct replacement for plywood. Nautical 24 is one of Coosa's stronger and stiffer glass-reinforced panels. It is typically used as a low-stress structural component.
• Density of 24 pounds per cubic foot
• Will not rot; extremely low water absorption
• Dimensionally stable
• Attach with screws, staples or ...

Coosa Composites
Bluewater 20 Series Marine Board

Continuous Strand Fiberglass with Layers of Woven Roving

With the same basic contruction, Bluewater 20 is a lighter weight, economical alternative to the Bluewater 26 Series, yet maintains high stiffnes and strength to weight ratio. It is used as a direct replacement for plywood in semi-structural situations that are more critical than where the less stiff Nautical series can be used.
• Density of 20 pounds per cubic foot
• Will not rot; extremely low water absorption
• 45% or more lighter than plywood, ...

Coosa Composites
Bluewater 26 Series Marine Board

Continuous Strand Fiberglass with Layers of Woven Roving

Bluewater 26 is a high-density, polyurethane foam board reinforced with layers of woven roving and continuous strand fiberglass. It is used as a direct replacement for plywood in structural applications.
• Density of 26-28 pounds per cubic foot
• Coosa's strongest and stiffest panel, yet at least 30% lighter than plywood
• Will not rot; extremely low water absorption
• Dimensionally stable
• Attach with screws, ...

King Starboard
King StarBoard - Whole Sheets

Easy to Clean and Never Needs Refinishing

King StarBoard® is the original marine-grade polymer board and the industry standard. It is made by a proprietary process which produces consistently flat, continuous, polyethylene sheets. StarBoard is environmentally stabilized to withstand the harshest marine conditions. It will not rot or discolor like teak and other solid woods, and it will not delaminate like plywood. StarBoard is easy to work with using standard woodworking tools, and design changes are a snap. ...

King Starboard
StarBoard XL

Easy to Clean and Never Needs Refinishing

King Starboard
StarLite XL Polymer Board

Resists Odor, Even in Wet Environments

King StarLite®XL is ideal for instrument and equipment mounts, as a seating substrate, boat trailer sides and tracks, equipment locker interiors, engine rooms, and in other behind-the-scenes applications where non-finished edges aren't an issue. King StarLite XL is up to 35% lighter in weight than King StarBoard and it offers the same quality textured surface on both sides.
• Will not rot, swell or delaminate when exposed to water
• Able to ...

Taco
Marine Lumber ⁄ Starboard Sheets

UV Stablizied Polymer

Starboard is a very popular construction material that can be used throughout the boat. It is easy to clean, cannot rot, and is simple to install.
• UV stablized marine grade polymer specifically designed to withstand the harsh marine environment
• Individally shrink wrapped and labeled

Multipanel
MultiPanel - Foam Construction Panels

Heat and Bend - Forms and Holds Complex Shapes

MultiPanel is an innovative alternative to traditional building materials such as MDF, particle board, drywall, marine plywood, PVC panels, and other composite materials. An extremely firm closed-cell polyurethane foam panel, it is totally waterproof and suitable for all wet area construction. It can be used as an overhead or hull liner, for bulkheads, built-in furniture such as settees and helm stations, cabinetry, and other non-structural applications. MultiPanel can ...

Fiberglass Structural Shapes
Fiberglass Structural Shapes

Equal Leg Angle, Channel, and I-Beam

Used for building and repairing interior structures of boats. Dynaform structural shapes are produced from quality materials, providing excellent durability and years of maintenance-free service. Easy to cut, shape and install.
• Corrosion resistant
• Light weight and high strength
• Dimensionally stable
• Non-conductive
• Electromagnetic transparency
• All dimensions provided are outside dimensions
• ...

3M
3M™ Thinsulate™ Acoustic Insulation - MA6700

Nominal 2" Thickness

A non-woven 71% polyolefin and 29% polyester mat that has excellent sound-absorbing properties. It is useful in many marine interior applications such as overheads, hull liners, area separation panels, filling voids, etc. It is compressible, non-linting, lightweight, does not absorb water and it can be easily die-cut. This product comes with a polyolefin scrim on one side which protects the fibers and allows for maximum loft.
• Thickness: 1-1/2" ...

3M
3M™ Thinsulate™ Acoustic Insulation - MA4710

Nominal 1" Thickness

Thinsulate Acoustic Insulation is a hydrophobic polymeric microfiber sound absorber that helps improve interior sound quality and provides thermal insulation with minimal additional weight. It is useful in many marine interior applications such as overheads, hull liners, area separation panels, filling voids, etc. It is compressible, lightweight, does not absorb water and can be easily die-cut. This product comes with a polyolefin scrim on one side which protects the ...