Spinlock
BRS Block

Camming Spinnaker Sheet Block

A movable block with locking cam. Temporarily "parking" a line on this camming block can often save the weight and cost of an extra winch or clutch. Spinlock's mobile jammer block is ideal for situations where a fixed deck block can't be used: peeling spinnakers, or changing a sheet winch. For example, when you're approaching the downwind mark, lock off the spinnaker sheet on a BRS Block, and make up the jib sheet on the winch. A tug on the spinnaker sheet will ...

Spinlock
Mini Jammer SUA

1/4" (6mm) to 3/8" (10mm) Line

Spinlock's halyard jammer is popular for smaller winches because it is more powerful than a cam cleat but much smaller than a rope clutch. Cannot be released under load; line must be placed back on winch to release.
• Polished stainless steel reinforced body
• Low, rounded profile
• No accidental release
• Manual lock down

Antal Marine Hardware
611 Cam Clutch

1/4" (6mm) to 7/16" (11mm) Line

CAM 611 has a box structure in UV-resistant resin with steel reinforcements, an extruded aluminium base, a wear-resistant bronze cam mechanism, and a stainless steel aligning bushing.
• Can be completely dismantled for simple maintenance
• Line retrieval can be achieved with the lever closed
• Cam mechanism guarantees easy opening even under heavy load

Antal Marine Hardware
V-Grip Rope Clutches

5/16" (8mm) to 5/8" (16mm) Line

The new V-Grip stopper is designed to provide high holding power with no line slippage or damage while allowing the line to be released under maximum load without the use of a winch. Holding strength is increased by providing a long V-shaped cam mechanism that increases the bearing surface on the line.
• Inner structure is made of 316 stainless steel
• Compact size, only 6.6cm tall, makes it easy to install anywhere
• Tail line without opening ...

Antal Marine Hardware
V-Grip Maxi Clutch

5/16" (14mm) to 5/8" (15mm) Line

Designed for the extreme loads on boats over 60 feet. The V-Grip system is designed to provide high holding power with no line slippage or damage while allowing the line to be released under maximum load without the use of a winch. It increases the bearing surface on the line, therefore, reducing cover damage on high-tech lines as well as polyester.
• Hard black anodized aluminum structure
• 316 stainless steel mechanism and chromed bronze for the ...

Lewmar
D1 Rope Clutch

1/4" (6mm) to 7/16 (11mm) Line

The D1 clutch is designed for high load applications on boats up to 32 feet, and low load and control line applications on larger boats.
• Maximum holding power for all clutches relates line size to clutch size, maxing out between 5,000 and 6,000 lbs.
• Use 1/4" pan head fasteners
• SWL: 1,100 lbs.

Lewmar
D2 Rope Clutch

5/16" (8mm) to 9/16" (14mm)

The new D2 rope clutches are designed for high load applications on boats up to 55' and low load and control line applications on larger boats.
• Good holding power
• Clutch can be released under load due its unique variable geometry handle and the grip pattern of the dominoes
• Use 5/16" pan head fasteners
• SWL: 2,650 lbs.

Spinlock
Powerclutch XX

5/16" (8mm) to 1/2" (12mm) Line

The Powerclutch XX is the the ony secure clutch solution for genoa halyards on inshore racing yachts from 35-50 feet. They are also suitable for secondary applictions on larger yachts. It fills the critical holding load hap betwen other clutches and the ZS jammer.
• Special 3D wedge action helps contain full load with minimal rope wear
• Peek roller bearings give safe and controlled release
• Monocoque alloy box section for absolute overload ...

Spinlock
Powerclutch XAS

5/32" (4mm) to 1/2" (12mm) Line

Spinlock's XAS series clutches are perfect for racing vessels up to 27 feet and cruising boats up to 35 feet.
• Excellent all-around high performance
• High strength ergonomic handle with easy side access and soft feel
• Optional handle color inserts give positive identification
• Modular build: easiest to upgrade and maintain
• Interchangeable base optimizes grip for small lines
• Increases performance across ...

Spinlock
Powerclutch XTS

1/4" (6mm) to 9/16" (14mm) Line

Use XTS on yachts that require a higher safe working load and a more advanced release mechanism than the XAS, to ensure the best possible care of your lines in all conditions.
• Updated style repeating sucessful XAS features with added features
• Identical to XT series and replaces models from March 2002
• Extended range of cam upgrade options
• Extruded alloy handle with soft end grip
• Enhanced side fairing for side mount ...

Spinlock
Powerclutch XCS

5/16" (8mm) to 9/16" (14mm) Line

Use XCS on yachts that require a higher safe working load and a more advanced release mechanism than the XAS. The XCS also features further durability due to its metal sides and is therefore good for mast mounted applications where a knock from a spinnaker pole could be a common occurrence.
• Use the XCS0608/1 version on applications that are specific to 5/16" (8mm) lines or upgrade your current model with our CAM-0608 to ensure the best possible holding solution ...

Spinlock
Cam Upgrade Assemblies and Accessories

Spinlock
Bullseye BE

Low Profile Control Line Guides

Spinlock's Bullseye BE is a good solution for guiding an exta line to a cockpit cleat or clutch when no sheave is free in the organizer, or for coachroof and foredeck applications where lines run between two fixed points with little horizontal or vertical deflection.
• A very sleek looking low profile solution
• Perfect for keeping long control lines tidy and clear of possible snags
• Single mounting screw allows for self-alignment when ...

Spinlock
Furling Line Lead

Compact Stanchion Lead System

Stanchion mounted fairlead or sheave model furling line lead. Lines up to 1/2"; mounts to 1" stanchions.
• Fairlead model is for straight runs between stanchions
• Sheave model is for line entry and exit points where a change in direction occurs
• Unique tracker-ball angle adjuster allows body to articulate for perfect sheave alignment
• Easy to install - no need to remove stanchion
• Sheaves are replaceable
• ...