4 items are in this product group
For Threaded Thru Hulls
These 90° female threaded hose adapters are for use only with Orcas Marine shower⁄deck drain grates or all-thread thru hull fittings, made from 316 stainless steel.
12 items are in this product group
316 Stainless Steel
Ideal for aluminum fuel tanks.
8 items are in this product group
Cast Bronze
• Precision machined hose barb• Cast hex for easier installation
20 items are in this product group
Cast Bronze with Hex for Easy Installation
These are heavy duty, thick walled cast bronze fittings.
7 items are in this product group
• Cast hex for easier installation
13 items are in this product group
Cast Bronze w⁄ Hex for Tightening
These are heavy-duty, thick walled cast bronze fittings. The last two fittings in the table have barbs at a 45° angle from the threaded end, instead of 90°.
16 items are in this product group
Full-Flow - FF and FFC Series
For plumbing applications where unrestricted flow through a given pipe size is a priority, and hose size is adaptable.While a standard 1" x 1" pipe to hose adapter only has a 3/4" internal diameter in the 1" barb section; a Full Flow 1" x 1" pipe to hose adapter has the full 1" internal diameter all the way through. As a result, however, it requires that the next larger hose size be used - which may or may not be appropriate in every application.
17 items are in this product group
Bronze Standard Flow - PTH and PTHC Series
These straight (PTH) and curved (PTHC) fittings are designed for use with the same hose ID as the pipe size. In order to accommodate the designed hose ID, and to provide a safe wall thickness, the ID of the fitting must be smaller. • Fittings are cast bronze• A generous hex nut is cast-in to allow for secure tightening• Sufficient hose seating area is provided for double-clamping• PTHC fittings have a “sweep” 90° ...
11 items are in this product group
Pipe to Hose Adapters - Brass or Stainless
1 item is in this product group
Adapts 1-1⁄2" flexible hose to 1-1/4" male pipe thread. Ideal for use on heads, water tanks, and holding tanks.
5 items are in this product group
Brass Swivel Fittings
10 items are in this product group
Female Swivel Fittings
These reusable fittings thread on to their corresponding hose size, making a seal against the internal barb and being held in place by the threads. Nominal end fittings can refer to flared tubing, adapters, etc.• Can be used with 201, 206, 225, 266, 221FR, and SS25UL hoses• These fittings contain a dual seat that accepts both the JIC (37°) and SAE (45°) male configurations
14 items are in this product group
9 items are in this product group
#304 Stainless Steel
More sizes available by special order!
Bronze NPT Threaded Pipe Fittings
Nylon Hex Bushing
Install in discharge line of treatment systems to prevent back-siphoning in marine sanitation device. Works like a sink trap because it prevents waste in holding tank from siphoning back into the head, or sea-water from back-siphoning into the treatment system. With easy secure tabs.
24 items are in this product group
#304 Stainless Steel Pipe Fittings
Brass
FPT Coupling & Reducing Couplings
36 items are in this product group
Easy to Use - Install Additional Outlets or Replumb Your Boat or Recreational Vehicle
The use of Whale Quick Connect fittings produces a high integrity, reliable plumbing system specifically designed for mobile applications. Fittings and tubing design ensures easy installation and re-usability of components. Easy to use; just cut tubing to length and insert into fitting to the second stop. Remove by pushing in on the collet and pulling the tubing out.• Unique “Double Gripper” design provides secure lifelong tube retention even at excessive ...
34 items are in this product group
Replacement parts for the PHII & PHEII, quantities are one (1) unless otherwise noted.
Cast Red Brass with a Machined Surface
These fittings are CNC machined to class 3 fits, ensuring leak-free joints. All units are precision turned on hose end for a snug hose fit.• Material is 85-5-5-5 naval bronze (a type of red brass)• All parts are bulk-packed
Cast 85-5-5-5 Naval Bronze
These fittings are computer machined to class 3 fits, ensuring leak-free joints. • Precision turned on hose end to ensure snug hose fit• All parts are bulk-packed
6 items are in this product group
Threaded & Barbed
These fittings are made of high strength glass-reinforced Marelon®.• Hose size refers to barbed end• Female end is straight pipe thread
Marelon®
Made from high-strength glass-reinforced Marelon®. Designed for industrial applications.
These tailpipes are made from high-strength glass-reinforced Marelon®. The perfect choice for joining hose to Forespar ball valves and seacocks.
37 items are in this product group
Snap-Together Modular Plumbing Fittings
With Sea Tech's Quick Connect Fittings, you can plumb an entire boat without any tools except a tape measure and tubing cutter in an amazingly short period of time compared to conventional plumbing systems. Simply cut the tubing to length and push it into the connector. It's that simple! Your plumbing job proceeds almost as fast as you can measure and cut the tubing. Sea Tech products are applicable in many nautical applications including potable water (FDA approved ...
With Sea Tech's Quick Connect Fittings, you can plumb an entire boat without any tools except a tape measure and tubing cutter in an amazingly short period of time compared to conventional plumbing systems.• Thermal plastic black fittings and premium polyethylene tubing• Fittings rated to 250psi at 75°F and 100psi at 140°F; tubing to 160psi at 72°F and 100psi at 180°F• Exclusive patent pending O-ring guide properly aligns ...
19 items are in this product group
With Sea Tech's Quick Connect Fittings, you can plumb an entire boat or house without any tools except a tape measure and tubing cutter in an amazingly short period of time compared to conventional plumbing systems. Simply cut the tubing to length and push it into the connector. It's that simple! You can plumb an entire boat or house almost as fast as you can measure and cut the tubing. The Sea Tech 35 Series is a premium quality system which meets a variety ...
2 items are in this product group
Yellow, One Handed Cutter
The Sea Tech Tubing Cutter cuts the tubing square so that the outside diameter of the tubing is free from scratches and other damage.
Modular Design Allows for Flexibility and Increased Water Flow
Sea Tech Manifolds operate much like an electrical breaker box. The main water supply lines bring water into the manifold and individual distribution lines move water out to each fixture. All outlets have a built in valve, with available label, which provides the ability to stop the water flow to any single fixture without shutting down the entire water system.The new Sea Tech Manifold System comes in Single Side or Dual Side models, and utilizes an exclusive modular ...
Adapters for Attaching Switchs, Hoses & Pumps
Designed to be used with Rule pumps and thru-hulls. Heavy-duty molded, non-corrosive, high impact plastic.
All the features and advantages of Sea Tech's 5/8" Series 35 Quick Connect fittings but sized for 1" tubing. You can plumb an entire boat or house almost as fast as you can measure and cut the tubing. • A reliable, high quality, cost effective plumbing system• High performance thermal plastic off-white colored fittings premium, cross-linked polyethylene tubing• Maximized flow rates since fittings connect on the outside of the tubing
39 items are in this product group
For those who find comfort in the use of metal fittings, Sea Tech's 45 Series of brass quick connect plumbing fittings offer all the advantages and features of Sea Tech's other fittings series. These are heavy duty brass fittings approved for both domestic and commercial applications. Ideal for outdoor plumbing systems such as docks and marinas. Can be used with CPVC, copper, or PEX tubing. A reliable, high quality, cost effective plumbing system; you can plumb an entire ...
