Awab Clamps
Hose Clamps

316 Stainless Steel

The AWAB 316 stainless steel regular hose clamp features rolled band edges to eliminate the risk of damages to the hose. The joining of the bank to the housing is arranged in such a manner that the least possible deviation from a circular shape arises while the clamp is being tightened. The extra wide threads of the band are stamped, leaving the unperforated band smooth on the inside. In addition, the band and screw threads are properly pitched rendering the clamp virtually ...

Awab Clamps
Mini Hose Clamps

304 Stainless Steel

The AWAB 304 stainless steel mini clamps are especially suitable for the smaller dimensions of plastic and rubber hose. Mini clamps have an unbroken band with rounded edges. The band is folded over to retain the nut, and together with the small screw-thread pitch, gives the clamp self-locking characteristics.

Norton
Hold Fast Hose Clamps

300 Stainless Steel

Heavy-duty four piece 100% mechanically interlocked construction for greater strength. Positive compression 1/2" band for higher sealing at all applied torques.

Trident Marine Hose
T-Bolt Band Clamps

Stainless Steel

T-bolt clamps are designed to assure proper coupling retention for any marine hose. They offer a full 360° clamping surface, ideal for any below water line connection. Series 720 clamps have a 3/4" wide 301 stainless steel band with a 1/4" 18-8 stainless steel bolt and nylon insert lock nut. Torque to 75 inch-pounds maximum. The 720 Series clamps come in two size ranges: our L (Long) range is sized for black rubber water⁄exhaust hoses, while out HT (Hi-Temp) ...

Trident Marine Hose
Constant Torque Clamps

Stainless Steel

• 5/8" wide band, linear, housing, screw and bellville springs
• 7/8" OD range
• Automatically adjusts for heat and cold

Awab Clamps
Tail Tips

Hose Clamp Tips - Protect Yourself!

These soft red vinyl tail tips dress up your job while, more importantly, making those unsightly scars just a bad memory. As a bonus, they will fit on 1/2" band clamps from those other guys as well.

Awab Clamps
Flexible Clamp Driver

Clamp driver has a hexagon socket and flexible shaft which will facilitate the fitting of AWAB hose clamps in positions as difficult as 90°. The 9/32" (7 mm) socket maintains a steady grip preventing the driver from slipping. The large easy-grip handle is comfortable in the hand.

Norscot Shaft Seals
Hose Clamps

Stainless Steel

These hose clamps are matched for a proper fit on the various sizes of Norscot shaft seal hoses.

TH Marine Supplies
Oetiker® Clamp Installation Tools

Standard and side jaw pincers.

P.Y.I.
Clamp-Jacket

Protective Cover for Hose Clamp Tails

Made of EPDM rubber - resistant to weathering and performs well in brake fluids, acids, alkalies, ketones, oils, greases, water and steam.
• Protects user from possible injury from sharp end of hose clamp tail
• Completes work with a clean and finished look
• Temperature range: -65° to +300° F(-55° to +150° C)
• Sized for 5/16" or 1/2" wide standard hose clamp tail

TH Marine Supplies
Oetiker® Hose Clamps

• Clamp on
• Quick and secure
• Single ear
• All stainess steel
• Full size range for all marine hose

Trident Marine Hose
Extra Heavy-Duty Bilge and Livewell Hose

Series 147 with PVC Helix

This clear PVC hose is reinforced with a substantial black vinyl helix. Although its wall thickness is similar to clear PVC, or Red Tracer, the added reinforcing produces a hose with a definite “heavy duty” feel. It has a smooth interior, a very slightly ribbed exterior, and is FDA approved. Moderately flexible. Rated for below waterline connections.
• Bilge pump intake and discharge
• Drains - sink, shower, scupper
• Potable water ...

Trident Marine Hose
Trident VAC - H.D. Bildge and Livewell Hose

Series 144 with PVC Helix

Heavy duty bilge, drain and livewell hose. Clear vinyl (see thru) corrugated with black hard PVC helix and smooth tube. Provides exceptional flexibility and bend radius.
• No cuffs required
• Operating temperatures +10°F to +140°F (-12°C to +60°C)
• Note: NOT recommeded for below the waterline thru-hull connections

Sierra
VAC Vacuum Hose with FDA Liner - Series 145

Very Flexible, Can Be Used for Potable Water

Sierra
Extra-Duty⁄Industrial Grade PVC Vacuum Hose

For Bilge, Drain, Potable Water or Livewell

Trident Marine Hose
BilgeFlex - 120 Series

Intake and Discharge for Electric Bilge Pumps, Hand Pumps and Livewell Aerators. Sizes to Fit all Major Brand Pumps

Extremely flexible and tough corrugated polyethylene hose for bilge intake and discharge.
• Cuffed every foot for clamping
• Resists oily bilge and sea water
• Operating tempratures -40°F to +200°F (-40°C to +93°C)
• Note: not recommeded for below the waterline thru-hull connections

Sierra
Shields Multiflex Bilge Hose - Series 141

Shields Multiflex Hose has a clear FDA formula PVC with a heavy black or white vinyl helix. It is abrasion resistant, flexible and is resistant to mild chemicals and saltwater. This hose uses 147 right hand thread cuffs. Do not attach to thru hull fitting below the water line. Do not use glycol based antifreeze in hose. This hose is similar in appearance to Series 141 hose, but the sprial reinforcement is tighter. Smooth interior, heavily corrugated outer surface.
• ...

Sierra
Extra Heavy-Duty PVC Vacuum Hose

Series 146 Hose

• Bilge pump intake and discharge
• Drains, sink, shower, scupper
• Potable water tank fill
• Livewell intake and drain
• Sanitation intake, vent, pump out
• Smooth cover clear FDA formula PVC with white vinyl helix
• Rated for full vacuum. Resistant to: mild chemicals, salt water
• Do not use glycol based antifreeze in hose
• For below waterline connections
• Do not use in pressurized ...

Copper Tubing
Copper Refrigeration Tubing

Tubing is Measured by its Outside Diameter

• Seamless copper tubing
• Soft copper tube
• Sealed - dehydrated
• Type K
• Sold in 50 foot lengths
• Tubing is measured by outside diameter
• Note 5⁄8" copper tubing fits into Sea Tech's plastic 15mm fittings

Vetus Denouden
Copper Tubing

The 8 x 10mm Copper tubing is for use with the following hydraulic steering pumps and cylinders:
• Pumps MTP2010(R), MTP3010(R), MTP4210(R), or MTP5310(R)
• Cylinders MTC5210, MTC7210, MTC12510, MTC17510, MTC610, or MTC816

Trident Marine Hose
Straight Exhaust Bellows - Hump Hose

Single Hump

Hump Hose Bellows provide flexible connectors for marine wet exhaust systems. They offer much greater tolerance to heat, misalignment, engine movement and vibration, with significant savings in cost, parts, labor and space.
These molded exhaust bellows are 100% EPDM or silicone rubber with no textile reinforcement. Available from 3" to 10" ID with 6 step-up sizes.
• Black bellows: made from molded, high temperature, black EPDM rubber. Rated ...

Trident Marine Hose
45° Exhaust Bellows Elbow

Flexible Exhaust Connectors

Trident silicone and rubber elbows provide flexible connectors for marine wet exhaust systems. They offer much greater tolerance to heat, misalignment, engine movement and vibration, with significant savings in cost, parts, labor and space.
These molded exhaust elbows are 100% EPDM or silicone rubber with no textile reinforcement. Available from 3" to 10" ID.
• Black elbows: made from molded, high temperature, black EPDM rubber. Rated -40°F ...

Trident Marine Hose
90° Exhaust Bellows

Flexible Exhaust Connectors

Trident silicone and rubber elbows provide flexible connectors for marine wet exhaust systems. They offer much greater tolerance to heat, misalignment, engine movement and vibration, with significant savings in cost, parts, labor and space.
These molded exhaust elbows are 100% EPDM or silicone rubber with no textile reinforcement. Available from 2" to 10" ID.
• Black elbows: made from molded, high temperature, black EPDM rubber. Rated -40°F ...

Trident Marine Hose
Straight Reinforced Silicone Exhaust Bellows

Blue Silicone Hump Hose - Single & Double Humps

Trident Marine Hose
Trident Ply - Softwall Wet Exhaust & Water Hose

Series 110⁄200

Trident Marine Hose
Trident Flex - Wired Wet Exhaust & Water Hose

Series 100⁄250

Reinforced marine hose for longer runs and bent connections. Designed for engine intake, bilge discharge, toilet and holding tank connections and scupper lines. Also for marine wet exhaust where connection requires a long length (greater than four times the inside diameter) or the connection requires a significant bend.
• Heavy wall construction reinforced with wire helix imbedded between two tough synthetic spiral cord plies
• Construction allows excellent ...

Trident Marine Hose
Silicone Marine Wet Exhaust & Water Hose

Series 202V - Blue, Higher Temperature Rating, 10-Year Warranty

• Rated -65°F to +350°F max. continuous
• 10 year limited warranty
• 4 ply wall, width is 0.20"

Sierra
Shieldsflex II Marine Water⁄Exhaust Hose

Series 250 - Premium Wired Exhaust Hose

Designed for engine water intake and marine wet-exhaust. Internal wire reinforcement makes this hose applicable for long runs and connections which require a significant bend. Also for bilge discharge, scupper lines, head and holding-tank connections and other below waterline applications.
• Premium wire and fabric reinforced marine hose
• For use in all marine water and wet exhaust applications
• Meets or exceeds standards for certified wet-exhaust ...

Trident Marine Hose
Corrugated Marine Wet Exhaust Hose

Series 252 - Black

A very heavy duty, premium corrugated marine wet exhaust hose for longer connections with substantial bends. Thick tube and cover with wire helix between 2-ply reinforcement. Exceptional flexibility and bend radius. Resists heat, ozone, exhaust fumes, panting and collapse.
• Exceeds new SAE J2006, ABYC & NMMA standards
• Black high temp EDPM rubber rated for max. 250°F
• 5-year warranty
• Sold by the foot

Trident Marine Hose
Corrugated Silicone Marine Wet Exhaust Hose

Series 252V - Blue, Rated for Higher Temperatures

Sierra
Corrugated Wet Exhaust Hose

Premium corrugated marine wet exhaust hose for longer connections with substantial bends. Thick tube and cover with helix between 2 ply reinforcement. Exceptional flexibility and bend radius. Resists heat, ozone, exhaust fumes, panting and collapse.

Vetus Denouden
Rubber Exhaust Hose

Meet SAE J2006 Requirements

• Exhaust hose with an internal diameter of up to 6" inclusive, have a bending radius of no more than 1.5 x the diameter
• Exhaust hoses with an internal diameter of more than 6" have a bending radius of two times the diameter of the hose
• To reduce back pressure in the engine, the inside of all Vetus exhaust hoses is completely flush and smooth

Vetus Denouden
Cooling Water Hose

For Suction and Transportation of Cooling Water from Outside

• Application: Transportation of warm cooling water (between engine and keel cooler)
• Transportation from connection skin fitting - cooling water strainer, cooling water pump)
• Suitable for suction, pressure in salt or fresh water
• Made of PVC, colored white, with steel spiral inlay
• For temperatures of between +23°F and +149°F

Trident Marine Hose
Black Rubber Insert Sleeves

Hose Bushings

Used with exhaust or hump hoses to adapt a larger hose to a smaller fitting in situations where any increased back-pressure will not be an issue.

Trident Marine Hose
Barrier A1 Marine Fuel Hose

Exceeds ABYC H-24 & H-33,SAEJ1527, ISO 7840 & USCG Type A1

For both gasoline, petrol and diesel (including alcohol blends). Built with best fuel, fire and age resistant formulation, 2 spiral reinforcement and unique "Barrier Liner" on inside surface of tube so fuel is not in direct contact with rubber. Provides extraordinary resistance to fuel permeation and aging, as well as fire, heat, cold and ozone. Also features good flexibility for taking bends.

Trident Marine Hose
221FR Type A1, Blue, Steel Braid Fuel Hose

Fire Resistant Hose for Gasoline or Diesel Systems

221FR delivers test-proven performance in a wide range of operating temperatures and features high working and burst pressures, long-lasting reinforced construction, kink and cut resistance, and compatibility with a variety of 100R5 fittings in steel, brass and stainless steel. Available in 6 sizes.
• Meets SAE J1527 Style R3 USCG Type A1 fire and permeability requirements
• USCG accepted for commercial and recreational vessel applications
• ...

Vetus Denouden
Fuel Hose - Type A1

Meets the Highest CE Standards: ISO 7840 Marine Fuel A1

A1 rated fuel hoses have a special barrier lining which protects them from modern additives, including ethanol. They are designated as feed⁄vent lines, for example, the transport of fuel from tank to fuel filter, or to serve as a fuel tankvent line. Inside made of NBR rubber, outsie of CR rubber. Provided with a reinforcement layer of woven synthetic fabric. Suitable for both gasoline and diesel

Trident Marine Hose
A2 Fire and Alcohol Resistant Fuel Fill - Series 327

SAE J1527 (I-93) - USCG & ISO 7840 TYPE A2 - CE

Premium marine fuel fill hose. Thick wall with smooth tube and cover, wire helix between 2 ply reinforcement for excellent flexibility and bend radius. Resists permeation, fire, heat, cold, ozone and premature aging by all marine fuels including alcohol blends. Exceeds newest type A2 (USCG,SAE,ISO, ABYC) Standards NMMA type accepted, CE certified.
• Wire reinforced
• Black with red stripe
• Sold by the foot

Sierra
Silverado 2000 Outboard Fuel Hose

For Pleasure Craft Only

Resistant to gasoline/alcohol blends, remains flexible at low temperatures and is UV resistant.
• Premium outboard fuel hose
• Temperature range: -5° to 180° F
• Burst pressure: 175 lbs.
• 2-ply construction

Trident Marine Hose
Crimp Fit NPTF Fuel Hose Fittings

Brass Rigid Fittings