ITT Jabsco
135 SL Remote Controlled Searchlight

Sealed Beam Halogen Lamp

• Easily replaceable halogen delivers 100,000 candle power
• 1 lux at 865 ft.
• Supplied complete with joystick remote control
• Optional secondary full control panel for dual helm stations
• 320° horizontal rotation, 75° vertical sweep
• All materials are non-corrosive
• Complete with 15 ft. cable, with optional extension cables

ITT Jabsco
5" Halogen Stainless Steel Searchlight

100,000⁄50,000 Candlepower Spot⁄Flood Sealed Beam

The new Jabsco 5" 62026-series and 62022-series searchlights (with robust construction throughout) will deliver many years of dependable service, even in the toughest conditions.
• Electro-polished stainless steel housing and base that will not tarnish or rust
• Two-speed control enables fast search and precision targeting
• On⁄off and spot⁄flood beam selection
• Single joystick controls both 60° vertical and ...

Oberdorfer Pumps
Flange Mount Bronze Impeller Pumps

Fits Most Universal Engines

Oberdorfer makes high quality pumps.
• Port size: 3/8"
• Convenient drain plug
• Impeller is easily replaced
• PSI is 26 lbs.
• Max RPM is 3450
Note: Fisheries Supply is a Master Dealer of Oberdorfer pumps. If you are looking for a pump that is not listed here, please call our sales staff with any questions.

Oberdorfer Pumps
Generic Water Pump

Used on Various Engines

Oberdorfer's 301M bronze pedestal mount water pump is shaft driven.
• Port size 3/4"
• Max RPM is 3450
• GPM • Max psi is 34
Note: Fisheries Supply is a Master Dealer of Oberdorfer pumps. If you are looking for a pump that is not listed here, please call our sales staff with any questions.

ITT Jabsco
Engine Cooling Pump

Crusader Replacement

The Jabsco engine cooling pump for Crusader engines is designed to be a direct replacement for the stock Crusader pump Model No. 97179 (Sherwood E-35). It accepts the stock Crusader pulley and bolts directly to the Crusader mounting bracket. The 1" NPT internal threads in the ports accept the stock hose adapters. The Jabsco pump impeller can be used in either the Jabsco pump or the stock Crusader pump replacing the Crusader impeller no. 20300.
• Neoprene ...

Sherwood
Engine Cooling Pumps

Replacement Pumps for Onan Engines

• Heavy duty design for pulley drive or long couple
• Mechanical seal for extended seal life
• Rear support bushing for load absorption
• Ball bearing supported drive shaft
• Neoprene impeller and Buna seal standard
• Stainless steel shaft
• K75B shown

Sherwood
Engine Cooling Pumps

Replacement Pumps for Caterpillar Engines

• Heavy duty design for pulley drive or long couple
• Mechanical seal for extended seal life
• Rear support bushing for load absorption
• Ball bearing supported drive shaft
• Neoprene impeller and Buna seal standard
• Stainless steel shaft
• P1710 shown

ITT Jabsco
Special Engine Cooling Pumps

The ideal solution for raw water marine engine cooling from the originator of the flexible impeller pump. This semi-positive displacement design has superior priming ability, is compact, with simple mechanical characteristics that ensure trouble-free running and long life. The pumps illustrated here are designed and manufactured specifically for engine cooling applications. In addition to these, most of the pedestal mounted pumps can be used for engine cooling. The 17360-1001 ...

Sherwood
Auxiliary Power & Generator Pumps

Pumps for the Generators Manufactured by Perkins, Kohler & Westerbeke

• Four impeller flow ranges
• Ball bearing supported for pulley drive applications
• G907P shown

Sherwood
Engine Specified Pumps

Manufacturer's Original Equipment

Sherwood
Engine Cooling Pumps Cummins

Replacement Pumps for Cummins Engines

• Heavy duty design for pulley drive or long couple
• Mechanical seal for extended seal life
• Rear support bushing for load absorption
• Ball bearing supported drive shaft
• Neoprene impeller and Buna seal standard
• Stainless steel shaft
• GC1 Series pump shown

Sherwood
Engine Cooling Pump

Replacement Pumps for Chris Craft Engines

• Heavy duty design for pulley drive or long couple
• Mechanical seal for extended seal life
• Rear support bushing for load absorption
• Ball bearing supported drive shaft
• Neoprene impeller and Buna seal standard
• Stainless steel shaft

ITT Jabsco
Engine Cooling Pumps

Replacements for Sherwood Engine Cooling Pumps

Jabsco engine cooling pumps are constructed with all bronze body, bearing housing and stainless steel shaft to withstand harsh marine environments.
Options include:
• Choice of 1" or 1-1/4" ports
• Mounting tabs located front or rear of bearing housing
• 6-1/2" "A" belt pulley, pulley mounting adapter, or 3/16" key on the shaft
• NOTE: See www.fisheriessupply.com for service and replacement parts

Sherwood
Cooling Pumps for Four Cycle Small Block Gasoline Engines

Pumps for Chrysler, Pleasurecraft and Volvo

• Flow range to 37 GPM @ 3600 RPM
• 1" or 1-1/4" hose connections
• Pulley driven

Sherwood
Cooling Pump for Four Cycle Large Block Engines

Pumps for Crusader, Chris Craft, OMC, Chrysler and Volvo

• Two impeller flow ranges
• Flow range to 40 GPM @ 3400 RPM
• 1" to 1-1/2" ports
• Pulley driven

ITT Jabsco
Volvo⁄Alaska Diesel Pump

This pump is designed to mount directly inside the crank-shaft pulley on Chevrolet small block (305 & 350 C.I.) engines. Do not run the pump over 5200 RPM.
• Bronze pump body
• 1-1/4" ports
• 316 SS shaft
• Shaft seal: Buna N lip seal or mechanical face seal

Johnson Pumps
Service Kit - Crank Shaft Pulley Mounted Pump

This pump is designed for direct installation on the engine crank shaft pulley at a max of 5,000 RPM's. To prevent the pump from rotating, a torque bracket from the fastening point on the pump body to a suitable point on the engine has to be used.

Johnson Pumps
Flange Mounted Pump

Fits Volvo, Hino Engines

Customer designed for flange-mounting at a power take off of the engine. Different types of drives can be used but mainly gears or any type of driving members are used.
Note: F4B9 pump shown.

ITT Jabsco
Plain Bearing Bronze Pumps

These economical plain bearing bronze pumps are ideal for a wide variety of bilge, washdowns, engine cooling, circulation or dockside pumping needs with capacities of 11 or 25 GPM. Bronze pump body and stainless steel shaft resist corrosion. Packing type seals with grease cup lubrication and replaceable cam. Equipped with oil resistant nitrile impeller. Simple and economical to service.

ITT Jabsco
MerCruiser-Type Replacement Pumps

1-1/4" MerCruiser Cooling Pump

The Jabsco MerCruiser type replacement pump has a one piece bronze body and bronze end-plate unlike the aluminum, plastic and cast iron composite pump supplied as original equipment. It has a replaceable cam and wearplate so it can be totally overhauled. The long-life impeller fits both the stock MerCruiser pump and Jabsco aftermarket pump and is supplied with the gaskets needed to complete the impeller replacement. The pump has the option of left or right hand rotation.

ITT Jabsco
Flexible Impeller Pedestal Pumps

For Engine Cooling and General Purpose

Jabsco pedestal mount corrosion resistant bronze pumps are ideal for engine cooling, washdown, circulation and many general purpose on-board or dockside applications. The bronze or stainless steel shaft is installed with permanently lubricated ball bearings for long life and heavy duty service. Self-priming with the ability to operate in either direction at variable speeds. Capacities range from 3 GPM to 83 GPM with various port configurations and sizes. Most models ...

Sherwood
Pulleys

Replacement pulleys for Sherwood pumps.

Sherwood
Cover Plate

For Cummin Pumps

Johnson Pumps
Johnson Pump Replacement Parts

Sherwood
Gaskets

For Sherwood Impeller Pumps

Sherwood
Seal & Seal⁄Seat Assembly

For Sherwood Impeller Pumps

Sherwood
Cams

For Sherwood Impeller Pumps

Sherwood
Repair Kits

Major and Minor Repair Kit for Sherwood Pumps

Sherwood makes both “Major” and “Minor” maintenance⁄repair kits for many of their pumps. Thes kits have more parts than a simple “Impeller Kit” and can be generalized as follows: Minor Kits usually include the Seal Assembly, an O-ring or Gasket, and the Impeller. They may also contain additional minor parts such as keys and retaining rings. Major Kits usually contain all of the internal components of the pump, except the shaft (although ...

Sherwood
Ball Bearings

For Sherwood Impeller Pumps

Johnson Pumps
Flexible Impellers

These impellers are made of Neoprene for use in engine cooling applications.

Sherwood
Replacement Neoprene Impeller

Sherwood has a unique compound that ensures long life.
• Neoprene impellers perform well because of great elasticity, they snap back really well
• Neoprene maximum temperature: 130°F
• One impeller will fit more than one pump
• Always use Sherwood's impellers to ensure maximum performance of your pump

Sherwood
Neoprene Impeller Kits

Neoprene Impeller Kit Including All Gaskets and Service Booklet

Always use Sherwood's impeller to ensure maximum performance of your pump.
• Kits include: all gaskets, o-rings, and a new technical service guide
• Impeller kits are the same price as a single impeller
• Sherwood's unique compound ensures long life
• Neoprene impellers perform well because of their great elasticity, they snap back really well
• Neoprene maximum temperature: 130°F
• One impeller will fit more ...

Sierra
Impeller Kits

Sierra
Impellers

ITT Jabsco
Impellers

Slotted Shaft⁄Through Hole Pin Drive

ITT Jabsco
Impellers- Key Drive

ITT Jabsco
Impellers- Single Flat Drive

5/16" Shaft

All these impellers fit a 5/16" shaft.

ITT Jabsco
Impellers- Double Drive Keyway

ITT Jabsco
Impellers- Ding Drive Keyway

Bronze Insert

ITT Jabsco
Impellers- Spline Drive

Bronze Insert