GLENDINNING MARINE
Rotary Drive Cables

Glendinning manufactures a large variety of rotary drive cables that are typically used for tachometer or speedometer applications.
• Molded sealed ends have molded plastic end ferrules that protect the core of the cable (and your instrument) from moisture and contamination
• Inner liner of the conduit is self-lubricating high density polyethylene
• Outside diameter of the cable is only 0.300"

Sea-Dog Line
Dual Function Top Mount Engine Control

Sand Cast Brass Chrome Plated

This sturdy dual function control provides smooth control with a tough chrome plated brass body.

Morse Controls
33C Red Jacket® Cable

Series 3 (10-32 Threads)

Morse 33C Red-Jacket cables are the widely used. They are economical workhorse cables. Cable adapter kits are available for use with Mercury, Mercuiser, Johnson⁄Evinrude, and OMC sterndrives.
• Note: With Teleflex's purchase of Morse, look for these cables to be replaced by the comparable TFX CC332 Series cables in the near future
• Minimum bend radius: 8"
• Nominal travel: 3"
• 10-32 SAE threads

Morse Controls
33C Supreme Red-Jacket® Cable

Series 3 (10-32 Threads)

Since the purchase of Morse by Teleflex, the popular, high performance 33C Supreme Cables have been replaced by the next-generation Teleflex TFXtreme Cables (CCX 633 Series). Please refer to their separate entry, below in our catalog.

Teleflex Marine
TFXtreme CCX - Premium Control Cables

Series 30 (10-32 Threads) Universal Control Cables

TFXtreme cables offer unprecedented smooth action with low effort, plus minimal “slop” - all in one cable! TFXtreme's patented splined internal construction results in minimum contact and less friction between the sliding components than other cables. Furthermore, the internal tolerances around the cable can be tighter, resulting in less play inside the casing. This means when you move the lever, the controls respond instantly, without any play - even in the ...

Teleflex Marine
3300 Type Universal Cables

Series 30 (10-32 Threads) Universal Throttle & Shift Cables

These are general purpose, economy cables for either throttle or shift applications on many engine installations. They are ideal for short, simple cable routings.
• Direct replacement for Mercury Sport Jets® throttle cables
• Stainless steel Lubri-Core™ wire for smooth operation
• Minimum bend radius: 8"
• Nominal travel: 3"
• 10-32 threaded ends

Teleflex Marine
1979 - Present OMC Engines

Replacement Throttle and Shift Cables

For OMC engines, and Turbo Jets with OMC side mount controls that accept OMC "snap-in" OEM type cable. Drop in replacement cable that uses exisiting connections.
• Stainless Lubri-Core™ wire for smooth operation and long life
• 6" minimum bend radius

Teleflex Marine
Pre-1979 OMC Engine Cables

Replacement Throttle and Shift Cables

• Control end fits OMC⁄Johnson⁄Evinrude twin-lever controls, pre-1979
• Engine end fits OMC⁄Johnson⁄Evinrude engines, pre-1979

Teleflex Marine
1965 - Present Mercury Engine Cables

Standard and Premium Versions

These drop-in cables are engineered as exact replacements for OEM cables and allow you to use your existing connection components.
• Standard cables feature Lubri-Core™ SS wire for smooth operation and 6" minimum bend radius
• Premium cables feature a heavy jacket and splined, coated core element for maximum smoothness with minimal lost motion. They have a 4" minimum bend radius

U-flex
MachZero - Premium Universal Control Cables

Series 30 (10-32 Threads) - 33C Supreme Replacement Cables

The engineered conduit provides a very high level of cable flexibility. Ideal for high performance applications, long cable runs, and complex routings.
• High flexibility - bend capability exceeds the ABYC 8" minimum bend radius
• Use with inboard, sterndrive, and outboard applications
• Maintenance free
• Stainless steel end fittings
• 3.4" travel
• 10-32 threads

U-flex
C14 OMC Engine Control Cables

Throttle and Shift Cables

• For Johnson⁄Evinrude and OMC engines manufactured after 1979
• 3" stroke

U-flex
C22 Stainless Steel Control Cable

Series 43 (1/4-28 Threads) • Clamp Mount

Recommended for heavy-duty applications on inboards and jet drives. Better performance in installations where there are mutiple helm stations, or long complicated cable runs.
• Stainless steel clamp fittings at each end
• Stroke: 3.1"
• Heavy 1/4" cable with 1⁄4-28 threaded ends

U-flex
C23BC Stainless Steel Engine Control Cable

Series 43 (1/4-28 Threads) • Bulkhead Mount

Recommended for heavy-duty applications on inboards and jet drive boats. Ideal for long cable runs, multiple helm stations, cable runs with multiple bends, etc.
• Stainless steel clamp fitting at one end and bulkhead fitting at the other
• 3.1" stroke
• Heavy 1/4" cable with 1⁄4-28 threaded ends

U-flex
C5 Mercury & Mercruiser Control Cables

Replacement Throttle and Shift Cables

These cables can also be used for 1993 to present date Force Mariner engines.
• For applications over 50 HP (for applications under 50 HP, you can special order C16 Series cables)
• Stroke: 3.75"

U-flex
C8 Engine Control Cables

Series 30 (10-32 Threads) Universal Throttle & Shift Cables

General purpose, economy cables for inboard, sterndrive, and outboard engines, with appropriate accessories.
• Minimum bend radius meets or exceeds ABYC recommendation of 8"
• 3.4" stroke
• 10-32 threaded ends

Sierra
Johnson⁄Evinrude Throttle Cables

OMC Drive Systems

Morse Controls
DC Control

For Throttle, Choke, or Fuel Shutdown

The DC Control converts a standard 3300⁄33C cable into a utility control. Install through a panel on the dashboard or wheel box, or mount nearly anywhere using the optional stainless steel angle bracket. The DC control is recommended for throttle, choke, air or fuel shutdown, as well as governor or valve control.
• Use with 33C type cable; not included

Morse Controls
Conduit Fitting Kits

Formerly Known as Hub Adapter Kits

These kits are used in the field to adapt utility, neutral throttle, and Vernier cables to mount in bulkhead or clamp applications.

Morse Controls
Utility Cables

With T-Handles

Solid stainless steel core wire resists corrosion and moves easily in non-metallic liner even after months of storage. Uses standard Morse⁄Teleflex throttle connection kits.
• These cable heads are designed for panel mounting
• Cable includes T-Handle; T-Handle Kit shown in table is to adapt a different style of cable to a T-Handle

Morse Controls
Vernier Cables

Utility, Bulkhead & Clamp Mount Cables

Just push the button for easy setting of approximate position, and then turn the knob for micro adjustment. Positive, adjustable brake maintains settings regardless of vibration or governor back pressure. Ideal for throttles or other applications where precise control is desired. Uses standard Morse⁄Telflex throttle connection kits.
• Useful for remote control of throttle, choke, govenor, fuel valves, vents, and other applications
• These cable ...