2 items are in this product group
Stamped 304 Stainless
Weight is 1.48 lbs. Fastener is 3/8" bolt.
10 items are in this product group
Drop Forged Hot Dipped Galvanized
Screw pin anchor shackles are forged to comply with Federal Spec. RR-C-271b.
16 items are in this product group
Forged Hot Dipped Galvanized
Not Rated
4 items are in this product group
For Quick, Safe Connections to Marker & Flotation Buoys
A handy addition when you desire improved performance for tough mooring conditions. These are long-D shackles with a specially designed bushing which distributes the load evenly to the buoy's ropehold for maximum performance and longevity. Each shackle is available with either a 1" or 1-1/4" PVC bushing, for use with a variety of buoys and fenders.
Forged 316 Stainless Steel
• Electro-polished and tumbled to a high luster• Pin diameter stamped into body• Breaking loads are with load distributed over 80% of the pin length, similar to the area of the post of a block
3 items are in this product group
17-4 PH Stainless Steel
This heavy duty construction anchor rode swivel has a sleek design with solid screw pins.• Swivel spins 360°• Equipped with ball bearings for kink-free anchor rodes• Thread locking liquid included for cross pins• Replacement pins are available, should they ever be needed
Universal Anchor Rode Fairleads
These are rollers for anchor rode retrieval only. They are not designed to mount and stow an anchor.• Polished 304 stainless steel• Delrin rollers• Small roller dimensions: 2"W x 6.5"L x 3"H; mounting base length: 4"• Medium roller dimensions: 2.125"W x 11"L x 2.38"H; mounting base length: 6.875"
Investment Cast 316 Stainless Steel Body
These are heavy duty, investment cast, highly polished, stainless steel anchor rollers suitable for classic boats. The long version (#328050L) has a ball-lock keeper pin for the rode.
Weight: 1.08 lbs.
1 item is in this product group
Model AR-2
• For boats 20 ft. to 30 ft. with anchors up to 35 lbs.• Handles line up to 1" diameter and chain up to 3/8"• Easily raises and lowers without damaging the hull or topsides• Replacement wheel: W-25 (2.5")
Electrogalvanized Steel
Model AR-3
• A long-reach heavy-gauge anchor roller to help prevent damage to the hull or topsides.• For anchors up to 60 lbs.• Handles line up to 1" diameter and chain up to 3/8"• Ball-lock pin keeps line and chain within the channel• Replacement wheel: W-25 (2.5")
Model AR-7
• For Boats 20 ft. - 45 ft. with pivoting fluke anchors• Guides line up to 1" diameter and chain up to 3/8"• Captive ball-lock pin holds chain or line securely in the channel• Replacement wheel: W-25 (2.5")
For Claw Style and Bruce Anchors to 44 Lbs.
Anchor bow rollers provide a low friction mechanism which makes it easier to drop and weigh anchor. They also provide safe stowage for the anchor while cruising or at dockside.• When stowed, the uniquely shaped claw style anchor rests against the extended tabs holding the anchor safely and securely in place, keeping the foredeck clear• Makes it easier to drop and weigh the anchor without damaging the deck or topsides• Anchor is ready for ...
Model BRM-2
• For boats 9 ft. - 30 ft. with Bruce anchor sizes 2.2 lbs. -16.5 lbs., or Delta® anchors 14 lbs. - 22 lbs.• Patented self-adjusting system permits various size anchors to mount without rocking or rattling• Non-chafing design• Replacement wheel: W-25 (2.5")
Model BRM-3
• For Bruce anchor sizes 22 lbs. - 66 lbs. and Delta® anchors 14 lbs. - 35 lbs.• Patented self adjusting system permits various size anchors to mount without rocking or rattling• Non-chafing design• Replacement wheel: W-40 (4")
Model BRM-4
• For 22 lbs. Bruce anchor and 14 lbs. - 22 lbs. Delta® anchors • Captive pin locks the anchor in place - eliminates movement underway• Allows anchor to be self-launching• 3 replacement wheels: WH-07, WH-08, WH-09
For Danforth (Lightweight) Style Anchors
These anchor rollers are suited for Danforth style, fluke-type lightweight anchors, as well as Delta style plow anchors. They are designed to mount and stow the anchor while cruising or at dock.• Polished 304 stainless steel• Delrin rollers• Mounting base length of the 66840064 is 11.5"; weight is 5 lbs.• Mounting base length of the 66840066 is 12.5"; weight is 6 lbs.• Mounting base length of the 66840065 is ...
The double rollers on these units facilitate both launching and retrieving the uniquely shaped Delta anchors. During retrieval, the lower roller, with its less aggressive entrance angle, makes getting the shackle “over the hump” much easier.• Polished 304 stainless steel• Delrin rollers• Mounting base length of the 66840008 is 14-13/16"; weight is 9 lbs.• Mounting base length of the 66840009 is 18-13/16"; weight ...
Stamped 304 Stainless Steel
• For fluke-style anchors (e.g. Danforth®, Fortress®) to 33 lbs.• Includes keeper bail• Fits SeaHook® fluke anchors (Seadog part numbers: 317005-317022) 4.8 lbs. - 21.4 lbs.• Weight: 2.38 lbs.
• Anchors to 33 lbs.• Removeable pin• Weight: 2.46 lbs.
Pivoting Action Allows Fluke Style Anchors to Self-Launch
Anchor bow rollers provide a low friction mechanism which makes it easier to drop and weigh anchor. They also provide safe stowage for the anchor while cruising or at dock.• For any fluke style (Danforth) anchor up to 35 pounds• Designed for use with a windlass for convenience, the pivoting base allows the anchor to self-launch• When stowed, the anchor flukes rest against the extended tabs holding the anchor safely and securely in place, ...
The Sea-Dog Pivoting Bow Roller is designed to facilitate self-launching of the anchor. As the anchor line is paid out, the anchor roller pivots downward under the weight of the anchor allowing it to fall freely into the water.• For anchors to 45 lbs.• Mounting base is 7-7/8" long• Mounting holes form a triangular pattern: 2" C to C at base with a single hole 5-1/2" forward• Choice of two pivot points (6" or 10" ...
Model CR-1
• For Danforth®, Fortess®, and Delta® type anchors to 28 lbs.• Useful where there is limited deck space for mounting a larger roller• Overall width of roller is 2-7/8"• Replacement wheel: WH-17
Model CRM-1
• For boats 25 ft. - 75 ft.• Securely stows plow-type anchors 20 lbs. - 60 lbs.• Stainless steel bail holds line up to 1-1/2" diameter and chain up to 1/2" within its wide channel• Replacement wheel: W-30 (3")
• Mounting holes to be drilled at installation• Bail secures ground tackle• Weight: 8.0 lbs.
Model URM-1
This heavy duty anchor roller handles and stows plow, Danforth®, Fortress®, and Delta® type anchors 25 lbs. to 45 lbs.• For boats 25 ft. - 54 ft.• Handles line up to 1-1/2" diameter and chain up to 1/2"• Ball-lock pin holds rope and chain in channel• Patented self-adjusting system• Replacement wheel: W-40 (4")
Model URM-2
• For Fortress® anchors up to FX-23 (15 lbs.) and Danforth® to 13 lbs.• Bail holds line up to 1-1/2" and chain up to 3/8"• Flared mounting tips help eliminate chafe• Ideal for small boats• Replacement wheel: W-30 (3")
Model URM-3
• For Danforth®, Fortress®, and Delta® type anchors 12 lbs. to 60 lbs.• For boats 25 ft. - 54 ft. • Bail holds line up to 1-1/2" diameter and chain up to 1/2" within the wide channel• Low profile design• Replacement wheel: W-30 (3")
Model URM-4
• For Danforth®, Fortress®, and Delta® type anchors 13 lbs. to 28 lbs.• For boats to 35 ft.• Ideal for mounting anchors where there is limited deck space• Heavy-duty construction• Replacement wheel: WH-16
• For anchors to 45 lbs.• Keeper bail• Mounting holes are in a triangular pattern: 1-7/8" C to C at base, and a single hole 5-1/2" forward (6 inches from the aft edge)• Weight: 5.0 lbs.
Designed For CQR Plow Anchors to 45 Lbs.
Anchor bow rollers provide a low friction mechanism which makes it easier to drop and weigh anchor. They also provide safe stowage for the anchor while cruising or at dock.• Wide channel roller designed specifically for CQR and other plow style anchors up to 45 lbs.• When stowed, the anchor rests against the extended tabs holding the anchor safely and securely in place, keeping the foredeck clear• Anchor is ready for deployment on short ...
High-Gloss Polished Stainless Steel (AISI 316)
White nylon rollers are replaceable and UV stabilized. Hinged models provide a more efficient lead-in angle for landing large anchors with straight shanks, thus lowering the strain on the windlass.• Hinged or fixed• Suitable for rope and chain• Hinged models have a removable keeper pin
Made for boats with anchor platforms. Hangs down within a slot in the platform. Fits most styles of anchors.• Small platform roller is made for boats from 18 - 30 ft. with chain to 3/8" and line to 1/2" and fluke anchors to 28 lbs., others to 35 lbs.• Large platform roller is made for boats from 28 - 48 ft. with chain to 1/2" and line to 1-1/2" and claw anchors to 33 lbs., others from 20 - 45 lbs.• Polished 304 stainless ...
Model AR-4
• For boats 18' - 30' with anchor platforms or bow planks and pivoting fluke anchors• Handles line up to 1/2" diameter and chain up to 3/8"• Mounts in or under slot to hold anchor under bow plank
Model AR-5
• For boats 28' - 48' with anchor platforms or bow planks and pivoting fluke anchors• Handles line up to 1-1/2" diameter and chain up to 1/2"• Mounts in or under slot to hold anchor bow plank
Model AR-6
• For boats 35' - 75' with anchor platforms or bow planks and pivoting fluke anchors• Handles line up to 1-1/2" diameter and chain up to 1/2"• Mounts in or under slot to hold anchor under bow plank
These are rollers for anchor rode retrieval only. They are not designed to mount and stow an anchor. Designed for stern use and wide lead angles. • Bail keeps line captive• Accepts chain to 3/8" and line to 1" diameter• Polished 304 stainless steel• Delrin rollers
• For stern use where line usually leads sharply away to one side or the other• Also used for single-handed bow anchoring from the cockpit• Handles line up to 1" diameter and chain up to 3/8"
