Greenfield Products
Coated Anchor Chain

Over-sized End Links For Easy Shackle Attachment

Greenfield's unique, specially formulated, highly elastic PVC coating stretches to allow chain to bend and coil easily. Chain is an essential tool for safe anchoring. It provides weight between the anchor and the rode to ensure proper position when setting an anchor.

Sea-Dog Line
Chain Gripper Plate

AISI 316 Stainless Steel

The use of a Chain Gripper Plate on a bridle stabilizes the anchor chain and reduces stress on the windlass when anchored in heavy seas.
• Two holes accept 7/16" pin SS forged bow shackles (SDL# 147212) for connecting bridle lines to port and starboard cleats
• Fits anchor chain sizes: 5/16", 3/8", 7/16" and 1/2"

Suncor
BBB/HT Stainless Steel Chain

316L Stainless Steel Anchor Chain

This chain has dimensions of BBB and HT chain and fits most standard windlasses.
• BBB complies with all requirements of DIN 766
• HT complies with NACM's specifications

Acco
Grade 30 BBB Galvanized Anchor Chain

Silicon Rich Steel Promotes Better Bonding of the Zinc Coating to the Iron

Acco BBB chain undergoes a careful 11-step hot dip galvanizing process. This results in an exceptional finish with a higher zinc content and superior corrosion protection.
• BBB short-link chain is less likely to kink or form knots when pulled from the chain locker than the longer link proof coil chain
• A low carbon steel, general purpose chain, ideally suited as anchor chain
• Compatible with all major brands of windlass. Check fit or contact ...

NOAA
Acco - High Test, Grade 40, Galvanized Anchor Chain

Top Grade Marine Chain Used on all Brands of Windlasses

Acco High Test chain undergoes a careful 11-step hot dip galvanizing process and meticulous quality control. This results in an exceptional finish with a higher zinc content and superior corrosion protection.
• Working load is approximately twice that of comparably sized BBB or proof coil chain
• Material - high carbon steel
• While high test chain is more resistant to wear (abrasion) than BBB or proof coil chain, it is slightly less resistant ...

CMP GLOBAL UNLIMITED
CMP (CMP Global) - High Test, Grade 43, Galvanized Anchor Chain

ISO Short Link Chain For Use on All Brands of Chainwheels

All CMP Global Grade 43 high test chain has been calibrated for use on windlasses. For easy identification, the grade type and the logo “CMP” is stamped every 12 inches. Note: Technically a stylized “G-4”, the stamp may look more like “0-4”.
• Meets or exceeds the NACM & US Federal RR-C-271D specifications
• Made of high carbon steel
• 100% proof tested
• ISO-9001 quality assured
• Sold by ...

Acco
Proof Coil - Grade 30 ISO

A low carbon steel, general purpose chain, with a short compact link. The short link is ideally suited for anchor chain.
Check fit for windlass manufacturer’s specifications before purchase.

Acco
Proof Coil - Grade 30 ISO

A low carbon steel, general purpose chain, with a short compact link. The short link is ideally suited for anchor chain.
Check fit for windlass manufacturer’s specifications before purchase.

CMP GLOBAL UNLIMITED
CMP (CMP Global) - Proof Coil, Grade 30, Galvanized Anchor Chain

Long Link Chain

For easy identification, the grade type and the logo “CMP” is stamped every 12 inches. Note: The grade stamp is a stylized “G-3”, but may appear to you as “0-3”.
• Meets or exceeds the NACM & US Federal RR-C-271D specifications
• Made of low carbon steel
• 100% proof tested
• ISO-9001 quality assured
• Sold by the foot

Acco
Acco Grade 30 Proof Coil Galvanized Anchor Chain

Hot Dip Galvanized

A low carbon steel, general purpose chain with farm, industrial, and marine applications. While it is sometimes used for rodes due to its lower cost, for a given size, it has longer links which are prone to kinking and jamming, making it less well suited as an anchor rode.

Cooper Tools
Campbell® Proof Coil Chain - Pail

Grade 30 Galvanized Proof Coil Chain

An excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or tie down chains, and logging chains.
• Standard material: low carbon steel
• Standard finish: galvanized
• Do not use for overhead lifting
• Sold in pails

Suncor
Stainless Chain (S3)

Type 316L Stainless Steel Chain

Most economic and commonly used SS chain for commercial and marine applications. It's smooth finish makes it comfortable to handle when hand pulling anchors or securing a boat, in conjunction with a rustproof padlock.
• Made to Proof Coil dimensions
• Highly polished, passivated and marked with the grade of material
• Won't rust, looks good, and has high strength
• Note: Special order only; usually available within a week

Cooper Tools
Campbell® Coated Chain

Grade 30 Proof Coil Anchor Lead Chain

• Galvanizing provides excellent resistance to rust & sea water corrosion
• Yellow vinyl coating provides additional protection to deck finishes
• Standard finish: yellow vinyl polycoat with galvanized base
• Maximum length is 60 ft.
• Sold by the foot

Sea-Dog Line
Coated Anchor Chain

Galvanized Forged Steel PVC Coated

As no strength information is available for this chain, we recommend it only for non-critical, light-duty applications.
• Triangular end links have inside dimensions of just over 1" on each side
• Sold by the length

Sea-Dog Line
Anchor Chain

Galvanized Forged Steel

As no strength information is available for this chain, we recommend it only for non-critical, light-duty applications.
• Triangular end links have inside dimensions of just over 1" on each side
• Sold by the length

Vetus Denouden
Vetus Galvanized Anchor Chain

DIN 766 (High Test) Metric Chain

For an anchor windlass to function correctly, it is absolutely essential that the anchor chain is correctly matched to the windlass gypsy. Available in 8mm (0.9 lbs/ft) or 10mm (1.51 lbs/ft), calibrated anchor chain according to DIN 766 galvanized steel in lengths of 99, 165 or 330 feet.

Lewmar
Anchor Lock

316 Stainless Steel

This is a lightweight version of Lewmar's series of heavy duty cast chain stoppers. Windlasses are not designed to hold high loads while a boat is at anchor. When the windlass is not in use, and the boat is at anchor, the chain should be secured using a chain stopper, or this Anchor Lock for less demanding situations, or the rope rode should be secured to a high load-bearing cleat. This is particularly important when a sea is running.
• Prevents damage to windlass ...

Maxwell
Chain Stoppers

Prevents Damage to Your Windlass When Riding at Anchor, and When Setting or Breaking Out the Anchor

Chain stoppers are used to prevent damage to your windlass drive shaft caused by excessive loading. Mounted in front of the windlass, they are engineered to withstand the heavy shock loads imposed by waves when riding at anchor, and the strain of setting or breaking out the anchor. They are also recommended for rope and chain rodes to hold the chain while changing over from rope to chain on VC Model (non-deck pipe) vertical windlasses. It is recommended to use a chain ...

Orcas Marine
Chain Stopper

Cast Stainless Steel

• Heavy-duty
• Elevated model incorporates a SS pedestal and has base raised 1" above deck
• Backing plate included
• Removable pin for easy leading of chain
• Thumb tab for safe release of stopper

Windline
Stainless Steel Chain Stopper

• Easily mounts alone, or within most Windline anchor rollers to grip all types of chain from 1/4" - 3/8"
• 5,000 lbs. working strength helps prevent damage to the windlass
• Pawl flips up when not in use

Sea-Dog Line
Chain Stopper

Stamped 304 Stainless

Chain stoppers for Sea-Dog and comparable bow rollers. Mounts alone or inside most bow rollers. Chain stoppers help prevent damage to the windlass.
• 321820 fits chain sizes 3/16" - 1/4"
• 321825 fits chain sizes 5/16" - 3/8"

Sea-Dog Line
Captive Pin Chain Gripper

AISI 316 Stainless Steel

Innovative multipurpose device for quick, secure, connection to any point on a chain.
• Eye for attaching line
• Packaged in bulk

Wichard
Chain Grip

Marine 316 Stainless Steel

The Wichard Chain Grip has been designed to make anchoring safer and quieter, by relieving the tension on the anchor chain where it exits the vessel. It can be secured on the chain between two links for a one hand positioning. The locking set pin keeps it in position in any conditions.

Lewmar
Anchor Chain Tensioner

Secure Your Anchor While Underway

Chain tensioners mount to the deck and hook onto the anchor chain when the anchor is stowed. When tensioned, by activating the lever, it pulls the anchor tight against its chocks or roller. This prevents the anchor from moving or bouncing in a seaway, with the potential for damaging your deck or hull, or even losing the anchor. Works with rope⁄chain rodes.

Windline
Stainless Steel Anchor-Tite™ Anchor Tensioner

• Holds anchor securely in anchor roller to prevent rattle (200+ lbs. tension)
• For anchors up to 90 lbs. and any chain or shackle size
• Patented design locks in place, yet allows for quick release
• Snag-resistant profile

Johnson Marine Hardware
Anchor Chain Tensioner⁄Stopper

This fitting will securely tension and hold the anchor in the bow roller channel. This unit will free up use of the bow cleat and prepare the anchor for sea conditions assuring you peace of mind. This fitting is not designed to take the strain of the rode of a boat at anchor. Overall length is 12", the threaded hook has 1-1/2" of adjustment for ease of installation.

Lewmar
Chain Counter AA560

Panel Mount AutoAnchors

Maxwell
Windlass Remote Control

Panel Mounted Up⁄Down Switch for Remote Windlass Operation

• Can be mounted at the helm, or in the cockpit dashboard, or flying bridge
• Recessed buttons prevent accidental activation
• Splash proof - manufactured from marine-grade materials
• Power indicator light
• Must be used with a 12V or 24V dual-direction solenoid

Lofrans
Auto Anchor 150

Panel Mount Rode Counter for DC Electric Windlasses

Rode counter works with all-chain or rope⁄chain rode. Also suitable for hydraulic or AC powered windlasses using all-chain rode.
• Large LCD display shows length of rode deployed at a glance
• Easy installation and set up
• Pre-programmed calibrations for electric windlasses using rope⁄chain rodes
• Beeps to warn the skipper that the anchor is within 1.5 meters (4 feet) of docking
• Adjustable red backlighting ...

Quick
Handheld Chain Counter

Provides All the Information You Need to Operate Your Windlass with Confidence and Safety

A patented handheld digital chain counter and windlass control with an easy to read screen, and a unique LED flashlight incorporated into the end of the unit. From your remote location, you can lower or raise the anchor, as well as know how much chain you've paid out or retrieved.
• Incorporates an integrated LED flashlight to facilitate windlass operation in the dark
• Settable alarm for when retrieved anchor approaches the surface
• Chain ...

Quick
Control Panel Chain Counter

Provides All the Information You Need to Operate Your Windlass with Confidence and Safety

A digital chain counter and windlass control with an easy to read screen. From your wheelhouse or cockpit, you can raise or lower the anchor, as well as know how much chain you've paid out or retrieved.
• Simple, user friendly interface
• Settable alarm for when retrieved anchor approaches the surface
• Chain lowered is displayed in feet or meters
• Displays chain speed
• Displays information in 5 languages
• Clock⁄calendar ...

DIXIE_COLUMBUS MCKINNON CORP
Chain Grab Hooks - Clevis Style

Grab Hooks Attach Across a Mid-Link, On a Length of Chain, for Dragging, Pulling, or Towing

• Designed for use with Grade 43 (high test) or Grade 30 (proof coil) chain
• Heat treated, tempered and galvanized
• Forged in U.S.A. from high quality carbon steel
• Clevis pins are heat treated carbon steel, cotter pins are mild steel
• Working load safety factor of grade 43 grab hooks is three to one
• Embossed with chain grade and size
• Size of the hook denotes the size of the chain to be grabbed

Lewmar
Chain Grab Hook

Prevent Damage to Your Windlass From Excessive Loads

• For use with rope lanyard
• Hooks into anchor chain
• Used to transfer ground tackle load from the windlass to deck hardware when lying at anchor and when setting or breaking out the anchor
• Made of galvanized steel
• Highly recommended for all boats using a windlass

Sea-Dog Line
Clevis Grab Hook

Investment Cast 316 Stainless

Sea-Dog Line
Clevis Slip Hook

Investment Cast 316 Stainless

DIXIE_COLUMBUS MCKINNON CORP
Drop Forged Connecting Links

For the Temporary Repair Of or Adding Attachments To Low Carbon and Proof Coil Chain Only

Drop forged and heat treated for increased strength and wear resistance
• Interlocking forged pins mate together easily for better fit and assure even load distribution.
• To assemble, fit the body of one half into the opening of the other half and peen the pins to lock halves together
• A hammer and pliers are required for assembly

Sea-Dog Line
Lap Link

Electrogalvanized Mild Steel

Sea-Dog Line
Connecting Link

Investment Cast 316 Stainless

Owen Mills
Anchor Rode Markers

These markers show the exact anchor line payed out at a glance. Made from heavy vinyl coated polyester fabric in three different colors. The graduated markers show depth at 30-60-90, 120-150-180, 210-240-270 (feet, yards, fathoms, etc). Easy to insert at appropriate intervals, not for use with braided lines.

Imtra Corp
Chain Markers

Imtra offers these handy, color-coded markers to make it easier to keep track of your chain deployment. Offered in red, white, blue, yellow & green.