1 item is in this product group
Corrosion Protectors
Reduces or eliminates the build-up of corrosion products commonly seen around battery terminals. Keeps battery terminals clean and accessible, as well as maintaining maximal conductive efficiency. Buy them.• Blister card with 2 combination terminal protectors• For top or side terminals • Color: (1) red, (1) green
Battery Fillers are designed to replenish water that evaporates during discharge and recharging cycles. Use de-ionized water when filling your battery as tap water will shorten battery life.• Holds 2.25 quarts• Automatic shut-off valve allows easy dispensing of water and minimizes over filling • Black
2 items are in this product group
The Safe Way to Move Batteries
Battery Carriers are used when transporting new and used batteries. Quick and easy to use.
Monitoring your battery bank is easy with the Battery Monitor Kit (ME-BMK) from Magnum Energy. Acting as a kind of fuel gauge for your batteries, the ME-BMK monitors their state of charge and then provides this information in an easy-to-understand display via the ME-RC remote. With accurate charge readings, you can avoid unneccessary battery recharging, saving on fuel and long-term maintenance costs. If you already have a Magnum Inverter⁄Charger and Magnum Remote, ...
Combiner⁄Isolator
The Magnum Energy Smart Battery Combiner (ME-SBC) is an easy-to-use stand-alone battery combiner and isolator for 12 and 24 VDC systems. Apply a single charging source to the main battery bank and the ME-SBC charges a second battery bank using a portion of the current. The remote sense line can monitor voltage at a distant battery or charging source; it is also used to help minimize unnecessary cycling between combining and isolating, which can lead to early solenoid failure.
3 items are in this product group
Charge All Batteries Simultaneously, but Automatically Separate Them Under Load
The Battery Integrator is ideal for multiplying the single charging output of an inverter-charger to maintain both the house bank and an engine starting bank, then separate them during inverter function, so current is drawn from the house bank only. Enables charging of two separate banks without voltage drop, yet maintains 100% isolation at all other times. For systems of three banks or more, an additional unit may be installed for each additional bank.• Heavy ...
Battery Isolator
The Battery Mate allows you to charge several battery banks simultaneously and is compatible with any type of alternator or battery charger. As the voltage loss between the alternator and battery is negligible, the Battery Mate performs far better than conventional battery isolators. This ensures fast and complete charging of your batteries without having to make additional adjustments to the alternator. While traditional battery isolators use conventional diode splitters, ...
6 items are in this product group
Carrying Straps, Filler Jugs, and 12V Utility Light. Quality accessories for your Dyno battery.
Made In USA
This panel features an expanded scale, simplified color band meter for accurate battery condition of two separate batteries. Operation is controlled by a 3 position rocker switch, allowing independent testing of either battery. Comes complete with instructions and basic mounting hardware.
Battery Monitor Panel for 12⁄24 DC Systems
This sophisticated and popular panel provides a broad range of information to let you monitor the condition of your battery banks and avoid the nasty surprise of a sudden shortage of battery power. Includes voltage, current, Ah, time remaining, % capacity remaining for up to 3 battery banks, and more.• For three independent batteries - any combination of 12 or 24V DC banks• Easy installation; dust and moisture protected• State of charge ...
Stamped Anodized Aluminum
Highly Versatile Panel Blank
It accommodates switches configured as two position plus off or three position plus off. A label set of 22 common AC functions is provided. These fit into milled recesses in the panel which correspond to the various switch positions. The panel is manufactured of 1/8" thick black anodized aluminum which is stylishly accented with a complementary gray silk-screen patina. The switch is secured in place with press-in studs on the panel rear. The panel is also engineered ...
Makes Installation Within the Battery Area Even Easier
Cluster is completely bused and prewired internally and is supplied with mounting fastening along with easy to follow instructions. These include all connecting points clearly marked with ABYC labels. Horizontal unit.To be used in the following systems:• Single outboard dual battery bank• Single alternator dual battery bank• Twin alternator dual battery bank• Continuous rating: 275 amps• Intermittent rating: 455 ...
Remote Switching for Blue Sea Systems ML-Series Devices
These panels provide remote switching of up to three ML-Series (Magnetic Latching) Battery Switches and⁄or one Automatic Charging Relay. Use them to save a trip to your main battery switch and automatic charging relays for optimum battery management, or to secure your electrical system when leaving the vessel. The included Contura switches have special designations for these ML functions.• Lockout slides reduce risk of accidental switching• ...
For Use on Charging Systems Under 100A
To be used on the following systems:• Single outboard without Aux. charge output• Single alternator inboard engine without high performance battery sensed regulator
System is Designed for Twin Engine Installations Using Outboards Without Auxiliary Outputs
It will allow the port engine to charge the port start battery and the house battery when the VSR is engaged. It will also allow the starboard engine to charge the starboard start battery and the house battery when the starboard VSR is engaged, giving a combined charge from two outboards into the house battery until the voltage regulators on both engines control the charge. It will also allow the house battery to be charged if steaming on one engine.
Protects Electronics from Sags and Spikes Caused by Engine Starting
This DC main control panel isolates the Start circuit from the House circuit, and is available in four configurations. “Selector” models offer the familiar 1⁄2⁄Both⁄Off battery selector switch, while “Dual Circuit Plus” models offer simplified (and arguably, safer) “Off” and “On” functions with an emergency “Both” function for difficult starting situations.• Designed for single engine configurations
E-Series Dual Circuit Plus™ Battery Switch
• DC main circuit protection and 24 hr. circuits• Start circuit isolated from house circuit• Simplifies battery switch operation• Protects electronics from sags⁄spikes caused by engine cranking• Discharges batteries independently • Addition of an Automatic Charging Relay automates charging both batteries• Designed for single engine configurations• Allows emergency cross connect between ...
Keeps Batteries Isolated and Provides DC Main Circuit Protection
Designed to create a simplified electrical system in which the main house circuit and the starting circuit are not connected, and function independently of each other. Overcomes the switch position confusion associated with traditional four-way battery switches. Simplifies selector switch operation in that all switches are simply "On" or "Off" - turn engine and house switches to "On" when you board the boat, turn them to "Off" when you leave.• Isolates starting ...
Power Distribution, Switching, and Circuit Protection Combined in One Panel
The Dual Circuit Plus Battery Switch turns the house and start batteries on at the same time, but isolates them from each other. Battery isolationprotects the start battery from being discharged from the many house loads like refrigerators, stereos, and lights, preserving it for starting the engine.Battery isolation also protects sensitive electronics from voltage spikes and sags that may occur during engine starting. Simplifies battery switch operation ...
Designed for Isolating Battery Banks
Keeps batteries isolated to prevent accidental discharge while providing the ability to use either battery (or both) for starting one, or two, engines.• Isolates starting circuit from house circuit• Simplifies battery switch operation• Enables a failed house or starting battery bank to be isolated from the electrical system and both house and starting loads to be operated from the remaining battery bank• With the addition of the ...
Keeps batteries isolated to prevent accidental discharge while providing the ability to use either battery, or both, for starting one, or two, engines.• Isolates starting circuit from house circuit• Simplifies battery switch operation• Protects electronics from sags and spikes caused by engine cranking• Discharges batteries independently• Enables a failed house or starting battery bank to be isolated from the electrical ...
Provides Complete Battery Status Information
The LinkPro can measure currents up to 10,000 amps. It selectively displays voltage, charge and discharge current, consumed amphours, remaining battery capacity and the time remaining if you continue to use power at the present rate. It is equipped with an internal programmable alarm relay to run a generator when needed, or to turn off devices when the battery voltage exceeds programmable boundaries. The LinkPro Battery Monitor is the direct replacement of the XBM Battery ...
Battery Status at a Glance
The LinkLite battery monitor can measure currents up to 1,000 amps. It selectively displays voltage, charge and discharge current, consumed amp-hours and remaining battery capacity. It is equipped with an internal programmable alarm relay, to run a generator when needed or to turn off devices when the battery voltage exceeds programmed boundaries. A second battery input is also provided to monitor voltage on a second battery.• Read your battery bank like a ...
For Phase Three Series Battery Chargers
Use of this temperature sensor allows Newmar's Phase Three Battery Chargers to optimize the charging regimen by compensating for battery temperature. (Not available for PT-7 chargers.) Temperature compensation is 5mV per cell per °C.• Sensor supplied with 25 ft. cable and plug-in connector• TCS-12⁄24 plug-in sensor is used on all models (except those which require the TP12/24, see below)• TP-12/24 hardwired sensor is used on models ...
• Chemically treated to prevent terminal corrosion caused by acid leaks• Fit top or side battery posts• Place one on each post• Sold as pack of two
• High-impact construction• Wide, easy grip• Excellent for hard-to-reach batteries
Prevents the Battery With the Higher Charge From Draining Into the Battery With the Lower Charge
Allows two batteries to be charged simultaneously from a single power source.• Contains solid-state circuitry, embedded in insulation, for protection against moisture and vibration• Anodized aluminum heat sink housing for efficient heat dissipation• Use in negative ground electrical systems only• Max alternator rating: 42 amps, rating per leg (2 legs): 40 amps• Comes with 6" wire leads• 5"L x 3-1/4"W ...
8 items are in this product group
Rated for Use With DC Devices That Range From 10 Amps to 130 Amps Output
• Solid state devices allow electrical current to flow from your DC source to the batteries in one direction only• This allows one or two devices (depending on model) to charge multiple battery banks without the banks being connected. DC devices i.e. alternators, generators, battery chargersNote: All isolators impose a .6 volt drop in the circuit
7 items are in this product group
Charge Multiple Batteries Automatically From One or Two Alternators
Each battery is charged according to its need without overcharging.• Rated for systems up to 48 volts DC• Rustproof anodized aluminum case• Stainless steel mounting hardware provided• Protective covers provided for terminals
Woven Nylon/Brass Chrome Plated
1" wide weather-resistant polypropylene webbing and rust-resistant metal hardware with stainless steel screws for mounting.
Woven Polypropylene
4 items are in this product group
Battery box straps and battery tray straps feature woven polypropylene construction that is resistant to acid, saltwater, oil, and gasoline. They feature stainless steel hardware for mounting.
Prevent Premature Battery Failure
This economical product will save you money by maximizing the useful lifespan of your batteries. Lead-sulfate is created when a battery is discharged. When charged, in principle, all the lead-sulfate converts back to its component materials - lead, lead dioxide and sulfuric acid. However, as batteries age, lead-sulfate crystallizes on the surface of the electrode plates. This non-conductive material coating the surface of the plate causes a reduction in the surface area ...
12 Volt Starting & Deep Cycle
• Locally made and priced less pound for pound than other batteries of identical shape• Provides enveloped positive plates with glass mat for superior performance and longevity• Weigh more than other lead acid batteries of identical shape. Remember, when buying a battery, weight is capacity• Starting batteries have thinner plates with more surface area• Comes standard with automotive post terminals• Dimensions ...
These are 12V Dual Purpose Deep Cycl ⁄Starting Type Batteries
• 12 volt batteries designed to provide both deep cycle and starting service• Locally made and priced less pound for pound than other batteries of identical shape• Enveloped positive plates with glass mat for superior performance and longevity• Weighs more than other lead acid batteries of identical shape• Remember, when buying a battery, weight is capacity • Comes standard with wing nut terminals• Group ...
