Perko
Mooring Bitt

Chrome Plated Bronze, Hollow

Sea-Dog Line
Garboard Plugs - Bronze

Machined Bronze

Marine Hardware
Plug Style Garboard Drains

Assembly is Cast Brass Threaded for 1/2" Pipe Plug

The drain plugs have a dry seal thread pitch to ensure no water seepage. Unlike hollow plugs which are subject to cracking by the expansion of freezing water, these solid plugs will withstand this pressure and remain watertight.
• Chemically resistant to fuels, oils and battery acid
• Flanges are drilled and countersunk for three #8 flat head mounting screws

Sea-Dog Line
Garboard Plugs - Nylon

Injected Molded Nylon

1/2" pipe thread plug. May be used in other 1/2" plug applications.

Perko
Garboard Drain Plug

Cast Bronze

Marine Hardware
T-Handle Garboard Drains

Cast Brass Flange with Bronze Plug

These T-handle garboard drains are designed specifically for competition ski boats, with their unique hull and interior configurations. The flange is threaded from the back side so the plug can fit inside the boat. The T-handle is long and easily accessible, to avoid fumbling through dirty bilge water.
• Incorporates a hex for wrench operation
• 1/2" size has three mount holes, the 3/4" size has four
• Plug is solid to prevent freezing ...

Perko
Garboard Drain Plug

Cast Bronze Flange with Brass Plug

Perko
Garboard Drain Plug with Steel Wrench

Cast Bronze Flange with Brass Plug

Complete with Zinc Plated Steel Wrench

Orcas Marine
Oval Drain Plug

Plug Remains Captured Even When Open

• 316 stainless steel
• Can be opened and closed by hand; no special tool needed
• When cleaning, plug can be easily removed
• Requires #8 screw

Sea-Dog Line
Drain Plug

Injection Molded Nylon

This drain plug is designed with a molded-in recess in the base, thus trapping the sealant in place and providing a more watertight seal.

Sea-Dog Line
Drain Plug

Forged Brass Chrome Plated⁄Injection Molded Nylon

The drain plug has a molded-in captive mechanism that keeps the plug in the body but still allows for easy removal of the plug when required.

Sea-Dog Line
Plastic Drain Plug

Injection Molded Nylon

Designed to fit securely in a 1" hole without the use of fasteners. The ridges on the body of the drain plug are designed to keep the plug in place. Sealant should be applied prior to installation to make a watertight seal.

Sea-Dog Line
Garboard Drain and Plug

Injection Molded Nylon/Acetel

Sea-Dog Line
Snap Handle Drain Plug

Stamped Stainless Steel or Stamped Brass

Sea-Dog Line
Baitwell Plugs

Stamped Brass⁄Neoprene

Snap lock handle is adjustable to tighten plug size to fit most bait wells currently available.

Sea-Dog Line
T-Handle Drain Plug

Stamped Stainless Steel or Stamped Brass

Attwood
T-Handle Drain Plug

Stainless Steel

Attwood's T-handle drain plugs are durable and secure-fitting. In addition, they are easy to use - a simple clockwise turn of the T-handle locks the plug in place, counter-clockwise to release.

Attwood
Snap-Handle Drain Plugs

Stainless Steel and Brass

Snap-handle drain plugs are durable and secure-fitting. They are easy to use - a simple clockwise turn of the handle tightens the plug in its tube, and the handle flips down to lock.

Ronstan
Drain Plug & Housing

Nylon

Plugs are fitted with watertight seals.

Ronstan
Drain Plug

Chromed Brass Body, Nylon Plug

Plugs are fitted with watertight seals and old style fine thread.

RWO Limited
Drain Socket & Bung

• For transom and buoyancy tank drains
• Socket fits 7/8" diameter hole
• Bung is locked by a half turn and has a retainer

RWO Limited
Update Drain Socket & Bung

• Updated drain socket and bung with easy-start screw thread
• Comes complete with O-ring and is fitted with retainer
• Same fixing hole centers as R2060 - works well as direct replacement

Sea-Dog Line
Drain Tube

Injection Molded HDPE

Sea-Dog Line
Baitwell Strainer

Stainless/Nylon

Baitwell Strainer attaches directly to pickup tube on Baitwell pump.

Sea-Dog Line
Plugmate™ Garboard Wrench

Injection Molded Polypropylene Fiberglass

The PlugMate™ garboard wrench will fit most standard and "T" style garboard plugs - see Sea-Dog part numbers 520041 and 520043. In addition, it has various deck plate keys and shackle key and includes replacement plug.

Beckson
Screw Type 1" Drain Plug

Screw-type drain plug with patented self-cleaning thread design, O-ring, and super strength center retaining legs to secure the center while draining. Ideal installation for transom of personal watercraft, small boats, fish wells, coolers, ice chests, water tanks, etc. Part should be mounted in a 1" ID hole with two S/S fasteners and positioned with gap in thread at lowest point.

Sea-Dog Line
Snap Handle Drain Plug

Stamped Aluminum

Recommended for use with aluminum boats only.

Sea-Dog Line
Oblong Garboard Drain & Plug

Investment Cast 316 Stainless

The oblong base of this captive garboard drain and plug sits lower in the stern for more water removal. A captive plug prevents loss.

Topper Industries
Aluminum Four Step Dock Ladder

Ideally Suited for People to Easily Get Out of the Water

Basic construction is welded using both round and square extruded aluminum tubing. Fastens to a horizontal deck and has an angle into the water to make the usage safer and more secure
• Steps bolted to the frames
• 4 wide ribbed steps, set 10" apart
• Extends above deck by 16"
• Distance from the mounting base to bottom step is 42"

Garelick MFG.
Motor Bracket Extension Shims

For Use With Outboard Motor Brackets

• Shaped to fit in between boat transom and motor bracket
• 1" thick, extends bracket aft for added clearance of transom flare
• Sold in pairs

Garelick MFG.
Replacement Mounting Pads

Black Poly

Fits all Garelick models except 71044.

Garelick MFG.
Yacht Seating System - Swivel, Slide, Lift

Seat Pedestal with Integrated Swivels, and Fore & Aft Slides

• 360° free rotation or positive lock in 45° increments - single lever operation with drag adjustment for optimal performance
• 6" of fore & aft travel with positive locking 1" increments. Solid 1" stainless steel slide rails with lubrication system are operated with single lever for effortless and smooth precision operation
• Vertical travel of 4" is operated from a single lever in lift-to-tilt motion. A gas spring ...

Garelick MFG.
Active Seat Suspension Unit

Soften Your Ride with the Active Seat Suspension System

• Helps to cushion the impact of uncomfortable and constant wave pounding
• Absorbs and minimizes up to 75% of the shock, jolt, and vibration
• Pedestal base or deck⁄floor mounting; mounts in between a fore and aft seat slide
• Heavy-duty forward hinge system allowing shock absorption to occur in the vertical plane only
• Slotted mounting hole pattern enables unit to be mounted in between any seat slide and seat bottom

Garelick MFG.
Tandem Fore and Aft Seat Slide Track Hardware

Ideal for Double Wide Flying Bridge, Helm, or Pontoon Bucket "Love Seats"

• Provides fore and aft movement for double wide seat installations
• Compact size for ski boat driver seat installations
• Installation application is perfect for seats mounted on a support deck box or molded in helm stations

BUCK ALGONQUIN
Flying Bridge Ladder Step

High Tensile Cast Aluminum Step for Flybridge Ladders

Used on new and older boats as a secure step bolted to the flybridge ladder.
• Found on a lot of Tolly and Uniflite power boats
• High tensile aluminum, anodized
• For 1" tubing
• Step size: 3" x 17"
• Tube angle 11-1/2 degrees
• Fastener size is 1/4"

Edson International
One-Step Boarding Step with Line

Cast aluminum, coated with durable, glossy-white baked-on urethane coating, this step is designed to attach to your lifeline gate stanchions and hang against the side of your boat. It has neoprene bumpers that won't mar your topsides, and the built in handles give you a secure handhold. Comes complete with 6ft. of braided line with stainless snap shackles.

Sea-Dog Line
Folding Ladder

Injection Molded Polycarbonate

These portable emergency boarding ladders are made of high-visibility orange polycarbonate with nylon rope supporting the frame. Each step has a molded in non-slip grip pattern. The ladders secure quickly to cleats, railings, stanchions and halyards and will support up to 300 pounds.
• Steps are approximately 9" apart
• Available in custom colors for large volume orders

Johnson Marine Hardware
Save-A-Soul Emergency Ladder

If you have ever fallen overboard on a moored or anchored boat with no one to help you back aboard, you will understand the value of this simple device. Just clip the neat Save-A-Soul pouch to your life line when you snug down in harbor and add peace of mind to your cruising.

Garelick MFG.
Cockpit Steps

For Stepping Up or Down From Cockpit of All Types of Cruisers

Attaches to inside of coaming with stainless steel Shur Loc catches (GAR#76000 - included).
• Durable 1" anodized aluminum uprights and stamped support brackets
• Available with high density polyethylene traction grooved steps or varnished oak traction grooved steps

Garelick MFG.
Folding Dock Ladder

Anodized Aluminum Dock⁄Raft Ladder