3 items are in this product group
Ideal for Flybridge or Remote Dash Installation
• 10mm Red LEDs giving important “Systems On” information • Comes with label sets• Also available with alarm and mute switch
4 items are in this product group
100% Waterproof Panels
Never forget your pump or blower is running again with the new e-Panel A series. At the touch of a button, this electronic audible timer provides preset times from 1 to 15 minutes. The built in stainless steel piezo buzzer sounds to indicate that time has expired. If mute is pressed, the ePanel silences the alarm and begins counting down the selected time cycle again. The e-Panel A is the perfect solution for reminding boat owners that a bilge blower or other device ...
Adaptable to a Variety of Uses
A simple, dependable remote-mounted buzzer.• Steel housing• Moisture-repellent insulator• 2 screw terminals with lockwashers• Dimensions: 1-7/32"L x 2-1/2"W x 2-17/32"H
Combination warning light and buzzer operate simultaneously, providing two way warning of unsafe or hazardous operating conditions.
2 items are in this product group
Special Alarm Feature
Perhaps the most important gauge on board is a reliable fuel gauge. Running out of fuel can be more than an inconvenience; on the water, it can turn into an emergency situation. Connected to a high quality Wema tank sensor, this Fuel Level Indicator has proven to be one of the most reliable systems afloat. As an option, Wema offers an optional smart module and buzzer which will sound an alarm when the fuel reaches a user-determined minimum level. Can be used with any ...
Alternate Way to Measure Gas Consumption
Knowing when to do preventive maintenance can be just as important as knowing what to do and how to do it. What if you did not have an odometer? The solution is the HM700 electronic digital hour meter with a trip reset. This hour meter is not only accurate but has no moving parts. Offered in either round or square design, the large L.E.D. display is easy to read. Use the trip reset to keep a maintenance schedule or for an alternative method for measuring gas consumption. ...
The sensor is placed in the bilge at a level where there is normally no water. If water unexpectedly comes up to alarm level, the buzzer will warn you in time. This is a good investment for safety on board. For buzzer order part no. BZ-1.
1 item is in this product group
Hard Wired
Can be used with Class A or Class B four-wire control panels, and has an LED indicator light that blinks every 10 seconds when in standby mode.• Dual-chamber ionization• UL listed• Direct, hard wired
• Connects to bell or horn; simple two-wire installation• Available for 135° F or 190° F• Compact size - 2-1/2" diameter• AQA#20112 is an accessory for Aqaualarm ASM 32-S Automatic Systems Monitor• AQA#20114 is an accessory for Aqualarm 32-T Automatic Systems Monitor
With Electronically Supervised Circuit
This fire monitor utilizes a supervised circuit and comes with a UL Listed Fire Detector. A supervised circuit sounds an alarm if a wire is broken, corroded, or tampered with, in addition to the normal alarm in the event of a fire. An intermittent audible warning is sounded if the circuit is malfunctioning and a constant audible sounds if there is a fire emergency.• Loud audible built into the panel• Intermittent sound means a circuit fault• ...
Compatible with All Cell Phone Standards Worldwide
When used with a variety of detectors and switches, the Cell Phone Emergency Alert will dial up to five cell phones and report alarm conditions in up to five critical areas. A detailed text message is sent to your cell phone whenever an alarm condition occurs. Works with any Aqualarm detector wor switch or any 12V, two lead, dry contact closure switch.• Programmed from a personal cell phone• Can be customized to monitor important areas
Can be set up to be used as a high alarm, low alarm or both. Unit must have a buzzer attached to it (BZ-1). A switch must be installed in the ground wire to silence the alarm when active. Can be used with holding, fuel and water tanks.
The ASM monitors all the important mechanical functions of your boat:• Bilge water level - unique anti-splash tube prevents false alarms; alerts high water conditions• Engine oil pressure - warns of low pressure before damage is done• Engine cooling water - patented design for marine use• Prevents water pump, engine, and exhaust damage due to low raw-water intake flow• Engine temperature - high engine temperature when ...
Digital Display Counts Down From Preset Time
The Last Watch II system gives the helmsman something to do (Hit Reset Switch) periodically and sounds an alarm if the switch is not reset, assuring the helmsman is awake on those long watches.• Assures Helmsman is awake during long watches • Digital display counts down from preset time • Counts down in minutes and seconds, up to ninety-nine • Sounds 30-second warning before loud horn (optional) is activated • Easy push ...
Only For Use With Alarms That Draw 0.5 Amps or Less
These devices activate a boat alarm (not included) upon loss of raw cooling water flow to the engine. Made of PVC and designed for marine applications, they use a 2-wire, non- polarity switch that is normally closed (normally open models are available). The switch opens, and the alarm shuts off, as long as the flow of water exceeds the minimum flow rate. While heat exchanger cooled engines will run several minutes without raw water flow before overheating, during that time ...
For Use with Aqualarm Marine Products
System monitor kit includes both an Aqualarm 851 P.C. control board and an 852 single engine indicator panel.
• 20116 - Easy bolt-on, two-wire installation, connects to bell or horn• 20118 - 1/2" MPT, senses water temperature, easy two-wire installation
• Monitors raw water intake• Sounds alarm if cooling water flow decreases or stops• Fits 3/4", 1", 1-1/4" or 1-1/2" pipe• Triggers red panel light
6 items are in this product group
Designed for Today's Electronic Engines
These engine shutdown devices are designed to be used with Fireboy automatic fire extinguishing systems. Compressed gas suppressants such as FE-241® and HFC-227ea will not stall a diesel engine. If fire breaks out aboard a diesel powered vessel, the engine(s) must be shut down immediately for the Fireboy fire extinguisher system to effectively extinguish the fire. Continued engine operation may remove the agent, lowering the concentration required to effectively extinguish ...
• Activates warning panel if wet exhaust exceeds 200F• Adjustable aluminum band fits 2" to 8" exhaust• Five feet of Marine Grade Tinned Wire
8 items are in this product group
Use with Sea-Fire Automatic Fire Extinguishing Systems
Required in diesel engine applications, these second-generation mico-processor Automatic Engine Shutdown systems will automatically shutdown engines and powered ventilation upon discharge of the fire extinguishing system. This ensures that the concentration of extinguishing agent reaches the level needed to put out a fire. Three control boxes are available with shutdown capability for 4, 6, or 8 devices such as engines, blowers, gensets, etc.For a complete system, ...
Super Low Current Draw
This boat alarm bell makes a loud clanging noise that can be heard over the loudest boat diesel and ship's noise. It is enamel coated and has stainless hardware which makes it ideal for marine use. The bell has an purpose-built efficient motor-driven mechanism that draws an amazingly low current of 0.029 amps,• For indoor⁄outdoor use• Dimensions: 6" diameter that mounts on a 4-1/2" base• Can be directly switched by any Aqualarm ...
These buzzers can be used with any detector. They can be flush or surface mounted.• 85dB buzzer (louder than a shop vac)• Compact design• Multi-voltage - works with 12, 24, or 32 volt systems
Protect Your Boat From Burglary
The Aqualarm Wireless Boat Security System is customizable to whatever your needs may be. The control panel has a backlit keypad for easy visibility. The system includes a keypad, a wireless motion sensor, 2 wireless door⁄window sensors and a key remote for arming and disarming remotely. The panel includes a loud, 110 dB siren built into the panel. Powered by 12V DC ship's power with 9 volt battery backup (included). Draws 50 milliamps when in monitoring state.
Dynamic Flat Trumpet Siren
These sirens are extremely loud (125 dBA⁄1 ft.) and surprisingly small - about half the size of comparably loud trumpet sirens. The low profile reverse trumpet design produces a loud noise from a small unit.• Six different (dip-switch selectable) siren sound options; can choose one, or all (sequentially)• For indoor⁄outdoor use• Includes reversible mounting bracket - wall or ceiling mount• Color: white
The CMD-4MR: This carbon monoxide detector is available when generator shutdown and multiple location warning are not desired. 12 VDC operation. Features a state-of-the-art sensor that is unaffected by common cleaning solvents. Lowest current draw of any Fireboy-Xintex CO Detector.The CMD-4MR-RLY: The most advanced CO detector available from Fireboy-Xintex. It features automatic generator shutdown capability. When dangerous CO levels are detected, the CMD-4MR-RLY ...
Ideal for All Boats Requiring Additional CO Alarm Protection
Install one CO alarm in every sleeping area, galley, and confined space for adequate protection. • 9 volt battery powered (included)• Extremely low battery consumption - only .016 mA draw• No wiring required - installs in minutes• Patented biomimetic sensor mimics the human response to carbon monoxide• Sensor is not affected by common cleaning solvents• Ceiling or wall mount• Listed to UL2034 rigid ...
Carbon monoxide (CO) detectors will alert the boater to potentially dangerous levels of colorless and odorless carbon monoxide. This is particularly important onboard, where spaces are enclosed, and fuels are used. CO is produced when any type of fuel is incompletely burned. Potential sources of CO in and around your boat can include gas or diesel engine exhaust, heaters, galley diesel or gas stoves and ovens, and defective engine exhaust systems.• Available in ...
5 items are in this product group
Automatically Detects Propane Leaks and Shuts Down System (Solenoid Models)
Xintex® S-Series fume detectors offer common sense protection against the potential on-board hazards of propane and compressed natural gas (CNG). With its high heat output and ready availability, propane has become the fuel of choice for marine cooking and heating. Being flammable and also denser than air, should there be a leak in the system, propane gas can settle in enclosed areas of a boat, presenting an explosion hazard should there be a spark. While CNG (methane) ...
Replaces MS-1 and PS-1 sensors. Color-coded RED with a quick-disconnect 12-inch lead that connects to a standard 20-foot sensor cable for use with M-1, CC-M-1, MB-1, MB-2, M-2A, S-1, S-1A and S-2A fume detectors. Plug-in connectors eliminate wire routing during installation or sensor replacement. Available in red.
Microprocessor Controlled to Ensure Correct Sensor Sensitivity
The Detector has the capability to control two sensors which detect both LPG and gasoline, with visual and audible alarms. There is a test switch to check operation of sensors with indicators for fault detection. It also has provision for the connection of an external alarm, bilge blower and the ability to switch a valve on. The detector is fitted with a unique "Pulse & Hold" circuit within the gas detector. This allows the solenoid to be switched at normal voltage ...
Water⁄Holding Tank Display
Round 2" gauge, for use with fresh water or holding tanks.
Threaded Liquid Level Monitor Senders
Designed to fit tanks with 1-1/2" NPT threaded top port.
Flanged Liquid Level Monitor Sender
Designed for refit of existing tanks that use standard five bolt pattern.
Dealing with Fuel Fumes
Gasoline fumes in a bilge or engine compartment, with or without a blower fan, have the potential to be a serious risk at any time. Xintex® offers a full line of gasoline fume detectors and accessories to match your specific needs. • M-1 Series are Single Channel detectors with sensor• M-2 Series are Two Channel detectors with sensor & fault light alarm • MB-2 Series are Two Channel detectors with sensor, fault light alarm ...
With Automatic Bilge Blower Control
The MB-2 includes the following features of the M-2A, and adds automatic bilge blower control. The blower is automatically started when a fume level of 16 to 20% LEL (lower explosive limit) is reached and remains on until fume level is safely lowered. A 30 amp relay is standard. The MB-2- system also includes a test button at the display module to activate the warning lamp, alarm horn and blower motor.• Microprocessor-controlled • Low profile, ...
M-2A Series
A microprocessor-controlled, two-channel gasoline fume detector in a low profile, water resistant design. Its features include two-channel monitoring capability, plug-in sensors (second sensor optional), fault light alarm, fault lights to indicate a malfunction in either the module or one of the sensors. A "press to test" button for each channel indicates either an OK or Danger condition. An Alarm Silence button deactivates the alarm horn. The system is calibrated ...
