Forfjord Anchor Replacement Pin Kit
New Product1
Share THIS PAGE:

Forfjord Anchor Replacement Pin Kit

The "Guts" of the Forfjord Anchor

Availability: Make a selection

Sku# Make a selection
Item ID Make a selection
Mfg# Make a selection
loading image
Checking for Price and Availability
Overview
After 20 or more years of continuous commercial use, it's just possible that the swivel pin in the head of your Forfjord anchor may have started to wear.
Don't worry. You can repalce it!

This kit includes the pin, a lock, and a key to hold the assembly together. The pin goes through the shank inside the anchor's head. The "U" shaped lock slides into the head and presses against the pin to hold it in place. The "V" shaped, angled key is press-fit into the head of the anchor where it secures the lock, and is held in place by sockets in the flukes.

Tools you will need: Sledge hammer and a propane torch.
You'll have to cut the original key with a torch to remove it. Once the new pin and lock are inserted, the new key is hammered in with a sledge hammer. Some heating may be required.

Note that the replacement pin mechanism is not galvanized, so once it is installed, folks generally have their anchor re-galvanized. By this time, the anchor is probably ready for a new coating, anyway.
 
 
 
 
 
 
 

© Copyright Fisheries Supply Company 2013. All rights reserved.
Host-Name:410486-FISHERIE