27 mm High-Load Midrange CB Traveler Car - Stand-Up Toggle w/Side Ears, 2300 lb SWL, 5-3/16"

These Midrange Captive Bearing Traveler Cars have a stand-up toggle with "ears" that holds the mainsheet block upright off the deck. The toggle attaches low inside the car, so mainsheet loads as much as 40° off-angle don't impede the ball bearings from rolling freely.

The side ears are used for attaching traveler control blocks directly to the stand-up toggle, without using the available car-mounted purchase configurations. This lets you choose the exact block and sheave size you require, as well as allowing for easy modifications.
Proper choice of purchase allows easy adjustment of the car using a single line and no winch. High-strength Torlon® ball bearings run on machined, Hardkote-anodized, Teflon® impregnated races for smooth trimming and easing.

High-strength Torlon® ball bearings run on machined, Hardkote-anodized, Teflon® impregnated races for smooth trimming and easing.

• Use with 27 mm CB Track
• Available in standard and high-load versions to handle mainsheet loads on boats from 27 ft to 34 ft (8 to 10 m)
• Solid 6061-T aluminum body for light weight, strength, and durability
• Captive bearings for easy loading and maintenance
• Please call us if you have questions regarding gear selection for your boat


Heavy on the technical side...

The following specifications apply to Harken's 27 mm (1.06") Mid-Range series of Traveler Cars and Track
The standard (1800 lb SWL) 4-1/4" car is typically suitable for mono-hull mainsails up to 260 ft² with end-boom sheeting, and 215 ft² with mid-boom sheeting.
The high load (2300 lb SWL) 5-3/16" car is typically suitable for mono-hull mainsails up to 300 ft² with end-boom sheeting, and 240 ft² with mid-boom sheeting.
For additional information as well as multi-hull data, please see the Specification Table.

For Control Block purchase ratio recommendations, see Mid-Range End Controls entries.