Interlac 665 Finish, Black - Gallon

A one-part alkyd marine grade gloss finish. For use as an easily maintained cosmetic finish coat on areas above the waterline.

• Apply by airless spray, conventional spray, roller, brush
• 48% percent solids by volume
• 481 ft²/US gal at 1.6 mils dry film thickness, allow appropriate loss factors

Interlac 665 should only be applied over recommended anticorrosive primers.
The primer to be used will depend upon vessel area, existing coatings, coating condition and application location.
Typical primers include:
Interprime 198
Intertuf 203
In the Americas, Interlac 665 may also be applied over epoxy primers or epoxy tie coats. Call your Fisheries Supply rep (800-426-6930) for the system best suited for the surfaces to be protected.