Jabsco Electric Toilet Conversion Kits - 12V

This conversion kit makes the installation of an electric toilet both affordable and practical. The electric flush pump easily converts manually operated toilets to the convenience of electric operation.
Although it is designed to fit Jabsco manual toilets, with the available optional adaptors listed below it can be installed on almost any manual toilet.

Toilet flushes by simply turning the large control knob on top of the pump. Select either "flush" to rinse, macerate and evacuate, or "drain" to drain liquid from the bowl.
The vigorous flush cycle is generally less than ten seconds and requires less than a gallon of water.

• Macerates waste for either holding tank or overboard discharge, where allowed
• Flush with fresh or saltwater
• Automatic inlet water checkvalve for additional safety
• Retains existing joker valve for automatic back-flow protection
• Can be reconverted back to manual mode in case of power failure
• Inlet port fits 3/4" hose and discharge fits 1-1/2" hose
• Size: 10-1/2"H x 4"W x 7-3/4"D
• Weight 7-1/2 lb