 |
|
|
 | This slider is made of hard black anodized aluminium and runs on low friction nylon inserts. The revolving upper structure (± 50°) is made of AISI 316 stainless steel; a double spring keeps it in vertical position. The high resistance resin sheave ...
85311 ANL 601.592 SIZE 45 GENOA LEAD CAR
|
|
|
|
| Hard Black Anodize Aluminum
Antal's tubular track genoa car system is composed of a series of modular fittings designed for light weight and ease of adjustment and control for boats up to 36 feet. The system's unique method of running the control line inside the track ...
85312 ANL 601.321 SIZE 45 REGATTA TUBULAR H TRACK 59"
85313 ANL 691.300 TUBULAR TRACK AFT END FITTING
85314 ANL 691.320 TUBULAR TRACK FWD END FITTING
|
|
|
|
| This unique combination melds together the trapeze handle and rope cam for one-handed use. By doing so, the grip allows easy trapeze adjustment. Allows full and constant control over your jib sheet Suitable for continuous trapeze ...
85316 ANL S1 TRAPEZE HANDLE
|
|
|
|
| For Boats Up To 52'
The Antal HS Mast Slider System is designed for boats with full batten mainsails that experience high loads and compression-loading on the mainsail luff. Installation The systems aluminium sliders contain HS composite fibre inserts that run on ...
85301 ANL 601.131 #50 MAIN SLIDER TRACK SLUG MT 6.23'
85303 ANL 601.200 #50 INSTALLATION TOOL
85305 ANL 690.421 #50 SLIDER TRACK JOINT
 View ALL 13 Part Numbers
|
|
|
|
| For Boats Up to 40'
The Antal HS Mast Slider System is designed for boats with full batten mainsails that experience high loads and compression-loading on the mainsail luff. Installation The systems aluminium sliders contain HS composite fibre inserts that run on ...
85290 ANL 601.130 #40 MAST TRACK 6.56FT OR 2M
85291 ANL 601.10040R4 #40 MAST SLUG KIT 17 R SLUGS/34 HOL
85292 ANL 601.201 #40 MOUNTING TOOL
View ALL 11 Part Numbers
|
|
|
|
| For Boats Over 60'
The Antal HS Mast Slider System is designed for boats with full batten mainsails that experience high loads and compression-loading on the mainsail luff. Installation The systems aluminium sliders contain HS composite fibre inserts that run on ...
85301 ANL 601.131 #50 MAIN SLIDER TRACK SLUG MT 6.23'
89777 ANL 601.121/3 MAST TRACK 9.84FT OR 3M (DIRECT MT)
90490 ANL 610.531 #60 TRIPLE SLIDER CARRIAGE
View ALL 9 Part Numbers
|
|
|
|
| 1/2" (12mm) to 9/16" (14mm) Line
Antal is making a new generation of snatch blocks that are simple, strong and easy to operate. High strength resin sheave with composite fiber main bearing and double side ball bearings Safety ball to stop the block from opening, with ...
163159 ANL 9040 SNATCH BLOCK 40MM SHV 1/2" LINE
163160 ANL 9060 SNATCH BLOCK 60MM SHV 9/16" LINE
|
|
|
|
| 5/16" (8mm) to 5/8" (16mm) Line
The new V-Grip stopper is designed to provide high holding power with no line slippage or damage while allowing the line to be released under maximum load without the use of a winch. Holding strength is increased by providing a long V-shaped cam ...
85270 ANL 507.111 V GRIP ROPE CLUTCH SINGLE 8-10-12MM
85271 ANL 507.121 V GRIP ROPE CLUTCH DOUBLE 8-12MM
85272 ANL 507.131 V GRIP ROPE CLUTCH TRIPLE 8-12MM
View ALL 7 Part Numbers
|
|
|
|
| Designed for the extreme loads on boats over 60 feet. The V-Grip system is designed to provide high holding power with no line slippage or damage while allowing the line to be released under maximum load without the use of a winch. It increases the ...
85277 ANL 508.116 MAXI ROPE CLUTCH SINGLE 14-16MM
|
|
|
|
| Locking and Non-Locking
The handle arm, made of forged aluminum with lightening holes, is extremely light and resists the heaviest torsion. The grip, covered with rubber to give a firm hold, runs on two ball bearings to increase its efficiency. All the models are available ...
146452 ANL 2011/NL 8" NON-LOCK IN ALUM HANDLE
146453 ANL 2011 8" LOCK IN ALUMINUM HANDLE
146454 ANL 2021/NL 10" NON LOCK IN ALUMINUM HANDLE
View ALL 5 Part Numbers
|
|
|
|
|
|
|
|
