 |
|
|
 | 4:1 Mixture
Epiglass HT9000 system can be used for glueing, laminating, sheathing, filling and fairing. The system is available with standard and fast speed hardeners to allow for a greater variety of working temperatures and conditions. In addition to the high ...
158139 INT HT9000KIT/QT RESIN AND FAST CURE KIT
78101 INT HT9000-1 GAL EPIGLASS EPOXY RESIN 4:1
78104 INT HT9000-5 4GA EPIGLASS EPOXY RESIN 4:1
|
|
|
|
| 4:1 Mixture
This is the most widely used hardener. Standard Hardener is suitable for larger jobs like laminating or sheathing or when a longer working time is needed.
78103 INT HT9002-4 QT. EPIGLASS STD EPOXY HARDENER
78107 INT HT9002-1 GAL EPIGLASS STD EPOXY HARDENER
|
|
|
|
| 4:1 Mixture
This product has been formulated to accommodate colder climates or users that require a faster curing system. Fast Hardener is especially suitable for smaller jobs such as gluing when a short working time is needed.
78102 INT HT9001-4 QT. EPIGLASS FAST EPOXY HARDENER
78106 INT HT9001-1 GAL EPIGLASS FAST EPOXY HARDENER
|
|
|
|
| For Cleaning Bare Fiberglass
Wash the entire surface thoroughly with Fiberglass Surface Prep, changing rags frequently. Before the liquid dries, wipe with a clean dry cloth. Be sure all wax and other contamination is removed. Failure to properly clean the surface will result in ...
146769 INT YMA601-1 GA FIBERGLASS SURFACE PREP
146771 INT YMA601-4 QT FIBERGLASS SURFACE PREP
|
|
|
|
| 4:1 Mixture
For climates that require a slower cure, HT9003 will ease application at temperatures between 68 - 95°F.
126775 INT HT9003-1 GAL EPIGLASS SLOW EPOXY HARDENER
|
|
|
|
| Two-Part Epoxy Compound
Interprotect Watertite is especially recommended for use to fill gelcoat blisters below the waterline. Use with the Interprotect Epoxy Barrier System or VC Tar2. Interprotect Watertite YAV135 is an excellent fairing compound due to its unique ...
132032 INT YAV135KIT-500 500ML INTERPROTECT WATERTITE
132033 INT YAV135KIT-L LITER INTERPROTECT WATERTITE
|
|
|
|
| Brightside® Polyurethane is the one of the most technically advanced one-part polyurethanes available. Brightside uses Polyflow 4000®, a unique polyurethane resin, which yields excellent flow and leveling characteristics as well as ...
05055 INT 4100-4 QT.BRIGHTSIDE LARGO BLUE
05056 INT 4152-4 QT.BRIGHTSIDE YELLOW
05057 INT 4190-4 QT. BRIGHTSIDE KINGSTON GRAY
 View ALL 30 Part Numbers
|
|
|
|
| Pre-Kote® Primer is a single part, topside undercoater formulated specifically for use with Brightside® Polyurethane, but can also be used with any one part topside finish. Pre-Kote® Primer is available in white and gray.
31495 INT 4279-1 GA WHITE PRE KOTE PRIMER
44775 INT 4279-4 QT WHITE PRE KOTE PRIMER
44776 INT 4280-4 QT. GRAY PRE KOTE PRIMER
|
|
|
|
| Excellent flow and hide properties
These high quality, topside alkyd-based enamels have been proven performers for over forty years. Interlux® Premium Yacht Enamels™ are superb for yacht applications above the waterline on hullsides, decks and fashion striping. Formulated ...
10385 INT 1-1 GAL.HIGH INTENSITY WHITE
10386 INT 1-4 QT.HIGH INTENSITY WHITE
10388 INT 16-4 QT.INTERLUX ENDEAVOR BLUE
View ALL 7 Part Numbers
|
|
|
|
| 202 Interlux® Fiberglass Solvent Wash is used to remove mold and to release agents, wax, oil and grease from the hulls of bare fiberglass boats. It is also an effective paint brush cleaner.
10441 INT 202-1 GAL.SOLVENT WASH
10442 INT 202-4 QT.SOLVENT WASH
|
|
|
|
|
|
|
|
