 |
|
|

 | Easy Sail Control Systems Combined with Strength and Reliability
Size 0 Ocean Traveler Kit - 2:1 Purchase System for mid-boom sheeting to 22 ft. and end boom sheeting to 26ft. - comprised of: 1-mainsheet car 2-end stops 1-1.2m sliding bolt track 1-size 1 dead eye 2-small composite ...
129435 LEW 29060152 OCEAN SIZE O TRAVELER SYSTEM 129436 LEW 29061354 OCEAN SIZE 1 TRAVELER SYSTEM 129437 LEW 29062354 OCEAN SIZE 2 TRAVELER SYSTEM
|
 |
 |
 |

 | Fit Midrange Styles of Track for Boats From 27 Ft. to 34 Ft.
Captive Ball Cars are smooth running, efficient and easier to load and unload from CB track Recirculating ball bearing travelers move freely under non-vertical loads and have a low-profile design The fully machined bearing races provide ...
154990 HAR 1623 MID RANGE ESP 3:1 TRAVELER CONTROL 154991 HAR 1624 MID RANGE CB TRAVELER CAR W/SHACKLE 154992 HAR 1625 LONG MID RANGE CB TRAVELER CAR W/SH
View ALL 15 Part Numbers
|
 |
 |
 |

 | Accessories for Raised Traveler Tracks
Harken Dodger Blocks route traveler control lines to the deck from bridge-mounted travelers so they can pass under the dodger and to cam cleats mounted within easy reach of the crew. Both kits are sold as pairs; the #1892 kit includes ...
04015 HAR 1849 6" HINGED TRAVELER TRACK RISER (PR) 132228 HAR 1985 6:1 DODGER BLOCK CONVERSION KIT 83649 HAR 1892 4:1 DODGER BLOCK CONVERSION KIT (PR
|
 |
 |
 |

 | For Boats Up To 40'
T-Track systems provide high strength to low weight ratio as well as being simple and reliable to use. Slides have low friction liners to protect the track. RC73231 genoa car, with articulating yoke, can accommodate two sheets for easy headsail ...
157048 RON RC73202 T-TRACK LOOP AND SLIDE STOP SER 32 157049 RON RC73243 T-TRACK SPINN POLE SLIDE STOP SER32 157121 RON RC73280 T-TRACK END CAP SER 32 PLASTIC
View ALL 7 Part Numbers
|
 |
 |
 |

 | For Boats up to 36 Ft. (11m) Using Size 1 Track
Sliding bolt track enables you to use the same bolt holes that held the original track. It is used for cars with control lines Drilled plunger track is a general purpose track, used with plunger stop cars Size 1 Track uses ...
05622 LEW 2917-1040 END STOP FOR SIZE 1 TRACK 126513 LEW 29171024 SIZE 1 MAINSHEET UPSTAND KIT 126963 LEW 29171011 SIZE 1 SINGLE CONTROL SHEAVES PR
View ALL 9 Part Numbers
|
 |
 |
 |

 | For Boats Up to 48 Ft. (14.6m)
Beam track: used when spanning cockpits or companion way hatches; uses 3/8" fasteners Drilled plunger track: general purpose track, use with plunger stop cars; uses 5/16" ...
127195 LEW 2916-2420 SIZE 2 DRILLED TRACK W/PLUNGER 2M 128476 LEW 2916-2410 SIZE 2 DRILLED TRACK 1M 128477 LEW 2917-2040 SIZE 2 SIMPLE TRACK END STOP
View ALL 11 Part Numbers
|
 |
 |
 |

 | For Boats Up to 70 Ft. (31.3m)
Uses size 3 blocks to fit size 3 upstands Suitable for 3/8" (10mm) control line Drilled track uses 3/8" ...
132494 LEW 2917-3030 SIZE3 CONTROL LINE END STOP 132495 LEW 2917-3013 SIZE3 SINGLE SHEAVE & CAM CLEAT 132496 LEW 2917-3011 SIZE3 SINGLE CONTROL SHEAVE
View ALL 9 Part Numbers
|
 |
 |
 |

 | For use with Schaefer Aluminum T-Track
Schaefer end stops are made of durable "Tuffnol" injection molded urethane. Track End Stops finish the ends of both standard "T" track and "Race" track. This helps prevent a trip point on deck as well as eliminating a ...
10194 SCH 74-39 END STOP FOR 1 1/2" "T" TRACK 172353 SCH 74-44 END CONTROL BLOCK F/1-1/4" TRACK 27894 SCH 74-34 BLACK END STOP 3/4" TRACK
View ALL 7 Part Numbers
|
 |
 |
 |

 | Strong, Easily Adjustable Attachments for a Variety of Applications
Schaefer Eye Slides are made from type 316 stainless steel. Welds are gas shielded and quenched. Tumbled, polished, and passivated for a lasting shine. Slides for 1" and 1- 1/4" tracks incorporate Schaefer's captive slide liner ...
10192 SCH 72-46 EYE SLIDE W/STOP 3/4" TRACK 27880 SCH 73-52 EYE SLIDE, SCREW STOP 1 1/2" 27900 SCH 74-48 ADJUSTABLE STOP 1" TRACK
View ALL 7 Part Numbers
|
 |
 |
 |

 | End Stops, Trim Caps & Track Riser
Endstops (#1522 and #1523) are energy absorbing polyurethane to absorb the shock loads of tacks and gybes Trim caps (#1621 and #1622) caps finish track ends when control assemblies are used, or in applications where cars ...
04015 HAR 1849 6" HINGED TRAVELER TRACK RISER (PR) 142182 HAR 1621 SET/TRIM CAPS F/MR LOW BEAM CBTRACK 145873 HAR 1622 SET/TRIM CAPS F/MR HB TRACK CB
View ALL 6 Part Numbers
|
 |
 |
 |
|
|
|