 |
|
|
 | Heavy Duty Stainless Steel Housing
Wema heavy duty bilge pump switch incorporates 2 float activated reed switches protected from damage and jamming by a stainless steel housing. The reed switches are glass encapsulated, and all electronics are fully sealed within the switch head. The ...
75772 WEM PBK12 12V AUTOMTIC BILGE PUMP CONTROL
75773 WEM PBK24 24V AUTOMTIC BILGE PUMP CONTROL
|
|
|
|
| Threaded Fitting, Lengths from 4" to 60"
These sensors are fully insulated to protect against dangerous voltage inside the tanks. This is an extremely important safety feature, because it protects against electrolytic corrosion as well as the danger of an explosion. Thread is 1.25" BSP, ...
158835 WEM S3U10 SS FUEL/WATER SENSOR FOR 10" TANK
158836 WEM S3U12 SS FUEL/WATER SENSOR FOR 12" TANK
158837 WEM S3U13 SS FUEL/WATER SENSOR FOR 13" TANK
 View ALL 38 Part Numbers
|
|
|
|
| 24 Volt
An hour meter is indispensable to assure boat engines are serviced at specified intervals. The meter is connected to the engine's electrical system. When the engine runs, the meter will register the accumulated operating time. 2" ...
75786 WEM IHR24 12/24V DIGITAL ENGINE HOUR METER
|
|
|
|
| Use with Wema Systems Holding Tank Gauge
316 stainless steel Holding Tank Sensor senses the level of sewage in your holding tank. It is used in conjunction with a Wema Systems Holding Tank Gauge (Order# 75762 or 196909) or multi-tank panel, all of which are sold separately. It is ...
156723 WEM SHS4 S.S. HOLDING TANK SENSOR FOR 4"
156724 WEM SHS8 S.S. HOLDING TANK SENSOR FOR 8"
156725 WEM SHS12 S.S. HOLDING TANK SENSOR FOR 12"
View ALL 4 Part Numbers
|
|
|
|
| This gauge provides insight to the condition of the battery, and the charging system. When the engine is running the gauge should read approximately 14 volts on a 12 volt system and 27 volts on a 24 volt system.
75778 WEM IPVR12 12V VOLT METER
75779 WEM IPVR24 24V VOLT METER
|
|
|
|
| The tachometer provides important RPM-data when the engine is running. It enables the operator to observe the motor's idle speed, cruising speed and top speed. In no case should the RPM of the motor exceed the maximum speed specified by the ...
75789 WEM ITAC4000 4000 RPM TACHOMETER, 2" SIZE
75790 WEM ITAC8000 8000 RPM TACHOMETER, 2" SIZE
75791 WEM STAC4000 4000 RPM TACHOMETER, 3" BEZEL MOUNT
View ALL 6 Part Numbers
|
|
|
|
| Special Alarm Feature
Perhaps the most important gauge on board is a reliable fuel gauge. Running out of fuel can be more than an inconvenience; on the water, it can turn into an emergency situation. Connected to a high quality Wema tank sensor, this Fuel Level Indicator ...
204913 WEM SAB HIGH/LOW ALARM MODULE
75765 WEM UPFR FUEL GAUGE PANEL INSTR. GAS DIESEL
|
|
|
|
| Running out of water on board can be very uncomfortable. Wema offers a water level gauge at a reasonable price to help prevent this problem. Can be used with any Wema System water ...
196911 WEM UPWR-WW WATER GAUGE PANEL INSTRUMENT WHITE
75766 WEM UPWR WATER GAUGE PANEL INSTRUMENT BLACK
|
|
|
|
| A Compact Panel to Monitor the Levels of Two Tanks
This convenient tank level monitor has a toggle switch to change from one tank to the other. Reads like a car gas tank gauge Use with appropriate Wema System fuel, water, or fuel⁄water ...
181898 WEM UP2H HOLDING TANK GAUGE DUAL PANEL INST.
196910 WEM UP2W-WW WATER GAUGE DUAL INSTRUMENT WHITE
75767 WEM UP2W WATER TANK GAUGE- DUAL, BLACK
View ALL 5 Part Numbers
|
|
|
|
| Adapts S3U Series Threaded Sensors and SSS Series Flanged Sensors to Your Tank
These adapters will allow you to fit a WEMA SSS Flanged Tank Sensor or a WEMA S3U Threaded Tank Senor to your water, fuel, or waste tank as a retrofit of an existing SAE sender, or as a new installation. The FL-2WE Top Adapter mounts on top of the ...
162350 WEM FL2WE MOUNTING FLANGE FOR THREADED SENSOR
172157 WEM FLS-U UNDER RING FLANGE ADAPTOR FOR FL2
|
|
|
|
|
|
|
|
