 |
|
|
 | Schaefer's drop forged "D" shackles are made from type 316 stainless steel. Each shackle features a threaded pin with a drilled cross pin hole to accommodate safety wire.
88390 SCH 93-18 D SHACKLE 3/8" PIN 3,960# SWL
|
|
|
|
| Aluminum, Delrin & Stainless Steel
Schaefer blocks rely on a variety of sheave designs, materials and scoring listed here as an array of products available. Yet, Schaefer does not recommend the replacement of Schaefer sheaves in the field. Delrin sheaves are used with line, whereas ...
131439 SCH 62-031 SHEAVE 1-7/16"OD(37MM) WHITE DELRIN
143074 SCH 62-039-02BW SHEAVE 3 1/4" 83MM OD WHITE LEXAN
159210 SCH 62-081-BW ALUM SHEAVE 2-3/8" OD 60MM
 View ALL 17 Part Numbers
|
|
|
|
| Schaefer's snap shackles are designed for maximum strength with minimal weight. Stronger, lighter and smoother to operate, Schaefer snap shackles offer high strength and jam-free operation. The enlarged throat and hinge area handles shear and ...
10179 SCH 45-30 TACK SNAP SHACKLE 5,000 SWL
27797 SCH 45-01 SNAP SHACKLE 2,250 SWL
27798 SCH 45-05 SNAP SHACKLE 3,750 SWL
View ALL 5 Part Numbers
|
|
|
|
| Welded stainless steel spinnaker pole sliders are constructed with formed rings that are heliarc welded to the slide. Schaefer designed the sliders to bend under conditions of extreme force rather than failing suddenly. Investment cast sliders feature ...
27874 SCH 73-32 CAST SPINNAKER POLE SLIDE 1"
27875 SCH 73-33 CAST SPINNAKER POLE SLIDE 1.25
69494 SCH 73-38 SPINNAKER POLE EYE SLIDE 1"
View ALL 5 Part Numbers
|
|
|
|
| 316 Stainless Steel
These high fatigue fittings are designed for use with corresponding pin sizes of marine eyes commonly used on 1 x 19 stainless wire. Extra deep strap designed to allow end-to-end assembly to double jaw toggles.Note: C⁄C indicates center to ...
23307 SCH 93-65 EYE JAW TOGGLE 5/16" PIN
23308 SCH 93-66 EYE JAW TOGGLE 3/8" PIN
23310 SCH 93-67 EYE JAW TOGGLE 1/2" PIN
View ALL 4 Part Numbers
|
|
|
|
| 316 Stainless Steel
Similar to Schaefer's eye - jaw design, double jaw toggles are used with the same pin sizes as marine eyes and mechanical end fittings on 1 x 19 stainless wire. Permit proper universal motion in rigging applications to help reduce wire, ...
10216 SCH 93-88 DOUBLE JAW TOGGLE 5/8" PIN
23324 SCH 93-84 DOUBLE JAW TOGGLE 1/4" PIN
23325 SCH 93-85 DOUBLE JAW TOGGLE 5/16" PIN
View ALL 5 Part Numbers
|
|
|
|
| Stamped, Electropolished 316 Stainless Steel
Schaefer exit plates are ideal for entrance or exit points of internal halyards and control lines. Stamped and formed to provide a smooth halyard lead and finished look to mast and boom slots they are carefully sculpted to eliminate line chafe ...
27782 SCH 34-46 SMALL HALYARD EXIT PLATE
27783 SCH 34-48 HALYARD EXIT PLATE , FLAT
49043 SCH 34-49 HALYARD EXIT PLATE , CURVED
|
|
|
|
| 1/2" (12mm) to 5/8" (15mm) Line
Ideal for turning internal halyards out of the base of the mast, or internal reef lines out of the boom. Fully welded cage with flush welded sheave pin Mounting ears formed to fit most mast and boom sections Anodized aluminum ...
27780 SCH 34-35 SINGLE EXIT BOX 1/2" LINE
27781 SCH 34-36 DOUBLE EXIT BOX 1/2" LINE
49042 SCH 34-32 SINGLE EXIT BOX 5/8" LINE
|
|
|
|
| 7/16" (11mm) to 5/8" (15mm)
The extremely low entry of these blocks keeps control lines and halyards close to the deck. Cheeks are constructed of tumbled and polished stainless steel for maximum resistance to corrosion and cracking common to plastic designs. Visible, ...
132413 SCH 32-06-UC HALF MOON FIXED FAIRLEAD 2 3/8" OD
49035 SCH 300-31 FIXED B.B. FAIRLEAD BLOCK
88401 SCH 506-31 FIXED FAIRLEAD BALL BEARING BLOCK
|
|
|
|
| 5/16" (8mm) to 5/8" (15mm) Line
Leads external halyards, topping lifts and control line aft from the mast base. White Delrin™ sheaves, for line halyards, contain UV inhibiting additives to protect the sheaves from damaging ultraviolet rays. Carefully designed black aluminum ...
25547 SCH 704-60 HALYARD LIFT TURNING BLOCK
27614 SCH 02-50 SGL HALYARD LIFT TURNING BLOCK
27633 SCH 03-50 SINGLE HALYARD TURNING BLOCK
View ALL 6 Part Numbers
|
|
|
|
|
|
|
|
