 |
|
|
 | Marine Wet Exhaust Muffler
The original FRP wet muffler in the marine industry. This "free flow" design has reduced internal baffles, making it ideal for engines sensitive to back pressure. Constructed of fire retardant, self-extinguishing resins which will not rust or ...
130755 VER 1000235 10" VERNATONE ROUND MUFFLER
181785 VER 1000165 4" VERNATONE ROUND MUFFLER
193968 VER 1000113 6" ROUND VERNATONE MUFFLER
 View ALL 14 Part Numbers
|
|
|
|
| Marine Wet Exhaust Muffler
The low profile Verna-Ski was developed to fit in the small places typically found in ski boats. The design is based on the baffled construction of the Vernatone family of inline mufflers. So some muffling capability is sacrificed for low profile and ...
187447 VER 1000262 3.5" VERNA SKI MUFFLER
69642 VER 1000217 SKI BOAT MUFFLER 3" I/O X 40"
69643 VER 1000266 SKI BOAT MUFFLER 3.5" I/O X 40"
View ALL 5 Part Numbers
|
|
|
|
| Wet Marine Exhaust Muffler
The compact Vernalift muffler was designed for sailboat auxiliary propulsion engines installed near or below the water line. These are “lift mufflers”, incorporating an internal design which helps force the water out of the muffler without ...
126972 VER 1500032 2.5" VERNALIFT SIDE IN/TOP OUT
130454 VER 1500123 1.63" VERNALIFT SIDE IN/TOP OUT
131481 VER 1500094 8" VERNALIFT SIDE IN/TOP OUT
View ALL 28 Part Numbers
|
|
|
|
| Helps Protect Engine From Reverse Water Flow in Exhaust System
Thru-hull fittings with flaps are designed to impede water backflow into the exhaust system and engine when stopped, moving slowly or backing down. Reverse water flow can cause severe damage if it enters the engine. Made from flame retardant, ...
128974 VER 1200344 2" FLAPPER REPAIR KIT
129036 VER 1200313 3" FLAPPER REPAIR KIT
69696 VER 1200300 THRU-HULL EXHAUST W/FLAPPER 2" WHT.
View ALL 12 Part Numbers
|
|
|
|
| Reduces Genset Exhaust Noise
The ideal solution for reducing annoying genset exhaust noise while at dockside or moored overnight. The Gen-Sep is installed downstream of a Vernalift muffler on generators, or small propulsion engines, to separate wet exhaust water and gas outflows.
133938 VER 1020350 3.5" GEN-SEP MUFFLER
135002 VER 1020162 1.62" GEN-SEP MUFFLER
72430 VER 1020300 3" GEN-SEP
View ALL 7 Part Numbers
|
|
|
|
| Combines a Vernalift Muffler and a Highly Efficient Gas⁄Water Separator Into a Single Unit
The patented Combo-Sep combines the function of wet exhaust muffling and water⁄gas separation into a single space-saving unit for the ultimate in quiet engine or genset operation. The Combo-Sep should be installed entirely above the water line. ...
126563 VER 1040200 2" COMBO SEP
142654 VER 1041000 10" COMBOSEP MUFFLER
142656 VER 1040300 3" COMBOSEP MUFFLER
View ALL 4 Part Numbers
|
|
|
|
| Marine Wet Exhaust Muffler
These mufflers are flattened and baffled such that they orient with the widest dimension in a vertical orientation. They are particularly well suited for installation in restricted locations where there is more vertical than horizontal space ...
168716 VER 1000121 8" VERNATONE OVAL VERTICAL MOUNT
181456 VER 1000123 10" VERNATONE OVAL VERTICAL MOUNT
81998 VER 1000122 8" VERNATONE OVAL VERTICAL MOUNT
|
|
|
|
| Port and Starboard
For marine wet exhaust systems, the Vernatone Oval Horizontal Mounted muffler is designed for installations where there is a height restriction. In these paired mufflers, internal baffling creates left and right handedness. They are based on the ...
166854 VER 1000162 6" VERNATONE OVAL HORIZON MNT PORT
166855 VER 1000163 6" VERNATONE OVAL HORIZON MNT STBD
|
|
|
|
| Port and Starboard
In these paired round mufflers, internal baffling creates left and right handedness. The Vernatone "free flow" design has limited internal baffles, making it ideal for engines sensitive to back pressure. The inlet⁄outlet ports are ...
142919 VER 1000249 5" VERNATONE ROUND MUFFLER PORT
142920 VER 1000250 5" ROUND STBD VERNATONE MUFFLER
185468 VER 1000241 4" VERNATONE ROUND MUFFLER PORT
View ALL 4 Part Numbers
|
|
|
|
| Fits inside inlet and outlet to prevent damage due to over tightening of hose clamps. Glued in place to prevent slipping.
139861 VER 1200586 6" CRUSH SLEEVE
145378 VER 1200587 8" CRUSH SLEEVE
182377 VER 1200588 10" CRUSH SLEEVE
View ALL 4 Part Numbers
|
|
|
|
|
|
|
|
