P510MAM Multipass Fuel Polisher - 10 Microns
New Product1

P510MAM Multipass Fuel Polisher - 10 Microns

Diesel Fuel Filter & Water Separator with Integral Pump • Available Elements From 2 to 30 Microns • Operates on 12 or 24 Volts
By: Racor

Availability: Make a selection

Sku# Make a selection
Item ID Make a selection
Mfg# Make a selection
loading image
Checking for Price and Availability
The P510MAM Fuel Polisher removes fuel contaminates directly from your fuel tank — before they can reach your fuel filters.
A surprising amount of water, rust flakes, and particulate matter can enter your tank during refueling.
Typical onboard fuel filtration systems capture this contamination as the fuel flows through 2 or 3 filters on the way to your engine.
With a load of poor quality fuel, filters often clog prematurely — which can lead to inadequate fuel delivery, increased emissions, and potential expensive damage to injectors. Refining the fuel before it reaches these filters ensures they work at peak performance throughout their service life.

The P510MAM contains its own internal fuel pump. By setting up a separate, off-line recirculating circuit - out of and back into the tank - the P510 Polisher removes water, dirt, algae, and rust from the fuel before it gets to your regular filters. This means longer filter life and less unscheduled downtime to change clogged elements.
The P510MAM Polisher is used in marine, agricultural, over-the-road, off-highway, construction, oil and mining, and power generation installations.

• Supplied with 10 micron element; replacement elements are available in 2, 10, and 30 microns
• Flow rate to 60 gph (220 lph)
• MAM - all metal bowl - UL 1105 fire test certified
• Multi-voltage 12V-24V pump motor
• Bottom loading cartridge design
• Aluminum and stainless steel construction
• Approved for all bio-fuels to b20, #2 ULSD, and JP8 fuels
• Aquablock media cartidges
• 26 psi maximum pressure output
• Includes wire harness with control switch
• Includes built-in Water Sensor Probe (requires an optional Water Detection Module to use this function; sold separately)
• M16-1.5 ORB inlet and outlet port fittings are sold separately
• Includes mounting bracket
• Not for use with gasoline

Heavy on the technical side...
• Note - Depending on how it is plumbed, the P510MAM Polisher can also be used as a Secondary Fuel Filter, or for Fuel Transfer between tanks, using its integrated pump (see Installation Instructions for details).

How does all that stuff get in there?
Water is most often introduced into the tank during refueling, if the source tank is contaminated with water.
Water can also enter fuel tanks when moist air is drawn into the tank through the vent hose as the air in the tank cools and decreases in volume during the night, or when the engine is shut off. The moisture in that air may condense on the sides of the tank, and eventually collect in the bottom of the tank as liquid water.
Bio-fuels and fuel treatments and additives can loosen existing deposits on the inside of the tank.
Contaminants and debris can be introduced into the tank during refueling.

© Copyright Fisheries Supply Company 2013. All rights reserved.