Water Detection and Filter Restriction Kit
New Product1

Water Detection and Filter Restriction Kit

RK 11-1570 • 12V or 24V • In-Dash Mount
By: Racor

Availability: Make a selection

Sku# Make a selection
Item ID Make a selection
Mfg# Make a selection
loading image
Checking for Price and Availability
The RK 11-1570 Water Detection and Filter Restriction Kit is designed to be used with all Racor Turbine Series or Marine Turbine Series fuel filter/water separator assemblies.

This kit includes a pre-set vacuum switch (7" Hg.), connector and outlet adapter fitting.
It does NOT include a Water Sensor Probe - which must be purchased separately; see Related Products, below.
The red "Drain Water" (water sensor) or "Change Filter" (vacuum switch) lights illuminate continuously and the buzzer sounds momentarily when the sensor or switch is activated.

• 2" gauge type detector and filter restriction module
• Includes preset vacuum switch, connector, and outlet adapter fitting
• Steel case black dial with white lettering
• Resets automatically after water is removed

Heavy on the technical side...

A water probe is only one component of a water detection system. It will not work without an electronic water detection module.
Water detection modules analyze electrical resistance at the probe tips and determine if water is present in the fuel. If so, a low voltage circuit is completed and (typically) a warning light and a buzzer are activated - alerting the operator.
The bowl must be drained (with the engine off) to remove trapped contaminants and water. The detection module will automatically reset itself once the water is removed.

© Copyright Fisheries Supply Company 2013. All rights reserved.