Stainless Steel Spade High Performance Anchor
New Product1
Share THIS PAGE:

Stainless Steel Spade High Performance Anchor

Stainless Steel • Unique Design Makes It So Effective

Availability: Make a selection

Sku# Make a selection
Item ID Make a selection
Mfg# Make a selection
loading image
Checking Your Price
Overview
Spade anchors have a concave, "scoop" shape that gathers and compresses the seabed in front of them - increasing pulling resistance - as they come under tension.
This is decidedly unlike similar-looking plow anchors, which are shaped to part the sea bottom while sliding along through it.
Pound for pound, the concave-shaped Spade anchor provides the highest holding power, in either sand or mud, of any anchor shape — even flat, fluke-style anchors.

Spade anchors also have a chisel-shaped, heavily weighted tip for digging into the sea bottom.
With half of the weight of the anchor concentrated at the sharp tip, Spade anchors land point down, and dig deeply into the sea floor as soon as you begin to set them — without the need for a roll bar to make sure they don't lie on their side.

A 2-piece design with a strong, fool-proof, wedge-shaped connection makes for convenient and easy disassembly for stowage or transporting...a big plus.

Spade anchors are manufactured in your choice of three materials - galvanized high-tensile steel, aluminum, and stainless steel.
Regardless of the material, the same model number of anchor is the same size and has the same surface area, performance, and holding characteristics.
Select the anchor material based on aesthetics (SS), price (Galv.), or the need for light weight (Aluminum).

• Provides superior penetrating and holding ability by virtue of shape and surface area, not its weight
• Unique lead-filled design always lands upright, with the tip ready to dig in
• Will fit in any bow roller that will hold the same size Delta or CQR anchor
• Self-launching and self-nesting in the bow roller
• No requirement to use any special mooring line or anchoring technique
• No moving parts to pinch your fingers
• For catamarans, select one size heavier
• Consult Specification Table for data on maximum recommended vessel displacement


Heavy on the technical side...

Model numbers are equal to one tenth of the fluke surface in square centimeters. So model X180 equals a fluke area of 1800 cm²

The jump in suggested maximum vessel size between the X60 and X80 models is due to a different, stronger, 3-piece welded shank construction used in the larger anchors.

All models meet these safety criteria:
• Digs in rapidly, regardless of the type of sea bottom
• Buries itself deeply within the bottom
• Once set, the concave shape provides maximum holding power without dragging
• If conditions are such that under extreme loading the pull exceeds the bottom holding characteristics, the anchor design offers smooth, constant high resistance to dragging with no skipping or bumping that might cause it to jar loose completely
• Holds regardless of a shift in direction of either the wind or tide
• Unique design prevents anchor rope or chain from becoming snagged by the anchor
 
 
 
 
 
 
 

© Copyright Fisheries Supply Company 2013. All rights reserved.
Host-Name:410506-FISHERIE