Performacide® Hard Surface Disinfectant is a strong, hospital grade disinfectant for use on hard, non-porous surfaces as a sanitizer, fungicide, algaecide, and deodorizer.
Hard Surface Disinfectant utilizes the biocide chlorine dioxide (ClO₂) which is generated at the time of use by adding a sealed pouch to a pre-measured amount of water in a spray bottle. The resulting solution contains 100 ppm solution of ClO₂ and can be used full strength on surfaces, or diluted for use as a sanitizer on both food contact surfaces and non-food contact surfaces. Chlorine dioxide kills many bacteria, viruses, and mold spores and mildew fungus which can cause disease and odor.
This kit contains an opaque, empty 32 oz spray bottle, and a foil pouch containing 1.19 gm of the active agent. To use, tear open the foil pouch to expose a dissolvable inner pouch containing the active ingredients. Place the inner pouch in the bottle and fill with water. Allow 1 hour for the pouch to dissolve and the chemicals to activate and reach the maximum strength of chlorine dioxide.
Spray directly onto the surface to be treated and allow to remain for 10 minutes to kill organisms before wiping dry or allowing to air dry. Heavily soiled surfaces should be pre-cleaned to allow the Performacide adequate access to any offending organisms. Dispose of stored formula after 15 days, according to the instructions on the label.
This product is not to be used in households or anywhere young children may be present.
For use in commercial kitchens, restrooms, hospitals, cruise ships, hotels, gyms, schools, etc.
• Hospital grade
• No-rinse formula - no harmful residue
• Sanitizes and disinfects hard surfaces
• Do not use on porous surfaces
• EPA approved