Painter's Pitcher - Plastic

Painter's Pitcher - Plastic

Features 6 Mixing Ratios plus Measuring Graduations • Read From Outside • 80 oz

Availability: Make a selection

Sku# Make a selection
Item ID Make a selection
Mfg# Make a selection
loading image
Checking for Price and Availability
Accurately measure and mix primers, clears, single stage, basecoat and any refinishing product in this sturdy, solvent resistant clear plastic pitcher.
Plastic Painter's Ppitchers are calibrated for measuring volume in both ounces, liters, and a dimensionless linear scale.
They are also calibrated for 6 common paint mixing ratios.
The scales on this pitcher are only for reading from the outside, however, there are raised, molded-in scales for reading volumes from the inside in units of 1/2 quarts.

• Safe for use with all paints, pastes, and adhesives
• Made from high density polyethylene
• Sturdy construction means you can clean and reuse
• Solvent resistant
• Red with black scales on translucent, seamless plastic
• Made in USA

Paint mixing ratios:
1 : 10% : 20%
2 : 1 : 1
3 : 1 : 1
4 : 1 : 1
4 : 2 : 1
100 : 60 : 80

Instructions for how to use mixing ratios:
Find the ratio on the side of the pitcher across the top, that you’ll need for your particular application.
Fill the product to a number in the first column, depending on how much you are mixing. If you need very little product use the #1 series. To mix a lot use the biggest numbers.
For example, let’s say you’ll need a medium size amount so you will use the #3 series. Fill to the 3 in the first column, then go to the second column and fill to the #3; and if it is a 3-stage ratio go to the third column and fill to the #3.
You don't have to use all the columns. For example, use only the first two columns in the 4:1:1 ratio to get a 4:1 mixing ratio.
If your ratio is not on the pitcher, you can use the ounce or liter scales to measure volumes - say for a 1:1 mixture.

© Copyright Fisheries Supply Company 2013. All rights reserved.