Vetus Diesel Fuel Tank - 10.5 GA

These full-featured FTANK-A/B diesel fuel tanks are ready to use right out of the box. They are designed for all regularly available diesel fuels, and are made from high-grade linear polyethylene - which is both rust free, and less prone to condensation compared to metal tanks.
The construction of the tank is seamless and therefore, can never leak. The fuel level can be seen from the outside for easy checking and the tank is easily cleaned through the connection plate.

Connections:
The A/B FTANKS come with a molded-in 1-1/2" diameter hose connector for filling purposes, as well as a 5/8" fixed connection for the vent line.
"A" tanks have 5/16" hose connectors for the fuel suction and fuel return lines.
"B" tanks have 3/8" hose connectors for the fuel suction and fuel return lines.
These fittings have integral internal pick-up and discharge tubes that extend to the bottom of the tank. Both fittings can rotate through 360°.
These tanks also include an installed threaded inspection port with gasket and lid
In the corner, near the fill port, is a molded-in center-point locator for installing a standard 5-hole SAE electric fuel level sending unit. The 5 (blind) mounting bolt holes are already molded into the tank.

An appropriate fuel level sender should be ordered separately, and the appropriate hole cut in the tank. Browse our sender options.
With all their anticipatory features, these tanks will save considerable installation time.

• Molded-in locator for 5-hole SAE fuel sender tank float
• Two fastening straps supplied with tank
• Made of linear polyethylene
• Two tanks may be inter-connected by means of an optional Inter-Connection Kit #FTLD