PROPANE/CNG MONITOR & CONTROL
S-2 Series Dual-Channel Propane⁄CNG⁄Gasoline Fume Detector Systems
Share THIS PAGE:

S-2A Dual-Channel Propane/CNG Fume Detector System

Automatically Detects Propane Leaks and Shuts Down System (Solenoid Models)
By: Xintex

Availability: Make a selection

Sku# Make a selection
Item ID Make a selection
Mfg# Make a selection
loading image
Checking for Price and Availability
Overview
Xintex® S-Series fume detectors offer common sense protection against the potential on-board hazards of propane and compressed natural gas (CNG).
With its high heat output and widespread availability, propane has become the fuel of choice for marine cooking and heating. Being flammable and also denser than air, should there be a leak in the system, propane gas can settle in enclosed areas of a boat, presenting an explosion hazard should there be a spark.

Unlike others, the Xintex fume sensor is splash-proof - allowing for mounting it right in the bilge, where propane vapors collect. It has a proprietary coating which is resistant to incidental water splashes, but allows vapors to pass.
While CNG (methane) is less dense than air and doesn't tend to settle, it can still explode if released in high enough concentrations and set off with a spark.

These Xintex fume detectors produce an audible and visible alarm when exposed to propane or CNG vapors. The "A" models also include circuitry to automatically close a solenoid valve - which shuts off the flow of propane or CNG, thus preventing additional leakage. The solenoid fails in the safe (off) mode, in case of electrical system failure.

As a dual-channel detector, the S-2A is suitable for monitoring 2 separate locations, or for placing two sensors in one very large compartment.

Although the MS-2 Sensor used in these systems can also detect gasoline vapors, the components of the S-series Detector Panels are geared toward propane/CNG.
For the specialized fume detection requirements of gasoline powered boats, please refer to the Xintex M-Series Gasoline Detectors; see Related Products, below.

• Self-testing circuitry for all operations
• Display dimensions: 4-3/4"W x 3-3/4"H x 7/8"D
• Display includes visual and auditory alarms
• Included sensor has a 20 foot sensor connector wire
• Factory set at 10 - 20% of lower explosive level to avoid nuisance alarms
• Sensor failure alarm
• Alarm horn mute function
• Models with "A" in the part number include circuitry to control a remote solenoid valve
• Made in USA

What's in the box...
The S-2A includes a display with alarm and rectangular bezel, one MS-2 gasoline/propane/CNG plug-in sensor (red), and a SV-1 automatic solenoid shut-off valve (1/4" NPT); an optional second sensor can be added

Click here for the Installation and Operation Manual for the S-2A.
 
 
 
 
 
 
 

© Copyright Fisheries Supply Company 2013. All rights reserved.
Host-Name:410486-FISHERIE