ACTUATOR W/EXTERNAL LINE CONNECTION
Standard Trim Tab Actuator
Share THIS PAGE:

Standard Trim Tab Actuator - with External Line Connection

For Installations with Restricted Access to the Inboard Side of the Transom
By: Bennett

Availability: Make a selection

Sku# Make a selection
Item ID Make a selection
Mfg# Make a selection
loading image
Checking for Price and Availability
Overview
This is a "standard" size actuator with special hydraulic hose attachment fittings right on the cylinder itself.
It is designed for use in the unusual circumstance where the interior of the transom cannot be accessed for making connections to the trim tab actuator hinge on the outside of the transom,
Use of this External Line Actuator will allow hydraulic hoses to be routed outside the boat and then through the transom at a location where there is no obstruction.
The external line connection actuator is recommended only when necessary. See Related Products, below.

Actuators are strong nylon and fiberglass hydraulic cylinders with piston-like arms that push the trim tabs into position and hold them there.
Standard size actuators are 13-3/4" long when compressed, have 2-1/2" of extension, and are suitable for the majority of trim tab installations.
Standard size actuator bodies have 4 rings at the lower end of the cylinder.

Click here for instructions for replacing an Actuator, and here for an Actuator blow-up diagram as well as examples and explanations for non-standard Actuator installations.
 
 
 
 
 
 
 

© Copyright Fisheries Supply Company 2013. All rights reserved.
Host-Name:410486-FISHERIE