Galvanized CQR Anchor - 20 lb (20 - 30 ft. Typical Boat Length)

The CQR has earned Lloyd's Register Approval as a High Holding Power anchor. The CQR's plow shape works well to penetrate a wide variety of seabeds including sand, pebble, mud and kelp.
This design performs well in difficult grassy or rocky bottoms.

• Proven shank hinge design allows the anchor to stay set during moderate wind or current shifts
• Breaks out easily when pull is vertical for raising the anchor
• Drop-forged, high-tensile steel makes the CQR one of the strongest anchors you can buy
• Guaranteed against breakage - forever
• Anchors 105 lb and above are welded, as drop forging is not practicable

What is the difference between Delta and CQR anchors?

The CQR closely resembles the Delta® design, but the main distinction lies in the hinge feature. This hinge enables the anchor to react more effectively to wind and tide variations than other anchor types. However, it has relatively lower holding power in comparison to the fixed Delta® design.

Note: the table below is based on the manufacturer's recommendations, and is meant as a guide only. If you are in doubt about the appropriate choice of anchor for your boat, please call us for advice at 800-426-6930.