The break through Eva-Dry "Air Dry" system is a revolution in dehumidifying. Built on Eva-Dry’s rock solid and proven renewable silica gel dehumidifying technology, the new Air Dry system, reduces "dry out times" between uses by as much as 80% so, you can get back to dehumidifying faster.
This new process uses warm air from a 110V AC blower in a "drying base" to dry out the dehumidifying silica gel quickly and efficiently.
Each cylinder can dry a volume up to 400 cu ft - approximately 7 ft x 8 ft - so you may need to use several for a typical room in your house.
Ideal for use in cabinets, closets, drawers, under the kitchen sink, boats, RVs, laundry rooms, pantrys, cabins, front-load washers, etc.
Typically can absorb water for 2 to 5 weeks until the gel is saturated and ready for renewal -- although this will vary with conditions.
To renew the cylinders, place on the blower/drying base and turn the switch into the on position. The base unit blows warm air through the cylinder and rapidly renews the silica gel in about 2 - 3 hours.
Perform the drying process outdoors, or in a garage, or bathroom with a vent fan, as the renewal process pouts all the absorbed moisture back into the air.
The drying process is complete when all the silica beads have changed from green back to orange.
•Super absorbent silica gel active component absorbs water right out of the air
•Silent operation
•No heat production while dehumidifying
•Won't spill
•Easily portable for use in different locations
•Only 2 hours to recharge
•No messy refills!
•Convenient color change indiates when drying is complete
•Convenient viewing window at top of cylinder to check color status
•Non-toxic
•Environment-friendly
•Pet and child safe
•Cylinder service life - tested to last up to 10 years of wet/dry cycling
• 10.25″H x 6.25″W x 5″D
• Approximate cylinder dimensions 0 3" Dia. x 6-1/2" Tall
What's in the box —
(1) 110V AC Dryer Base
(2) Eva-Dry 365 Cylinders
Click here for additional information about this product, and
here for the User Manual.