3,600 GPD Atlas+ Framed Watermaker - 220V AC/3Ø/50-60 Hz

The Atlas+ Series is the most compact high-capacity commercial system FCI has to offer.
Although built on the smaller, marine Max-Q+ platform to save space, the Atlas+ has all the working benefits of its much larger, industrial Neptune+ sibling. Its robust stainless steel drive components are sized for extended run times and to quickly make ample amounts of water.

The Atlas+ Series is capable of producing 1,400 - 3,600 gallons of fresh water every day. Should you ever find that you need to increase capacity, each model is easily upgradeable to capacities as high as the maximum of 3,600 GPD.
At the heart of the system is a durable wash-down duty, 5 HP motor and a robust 316 stainless steel high pressure pump that allow for extended run times.
When installation space or generator size is limited, the Atlas+ Series truly encompasses the best of both pleasure boating and commercial worlds.

The Automated Pressure Control (APC) with manual override puts making pure fresh water, literally, a finger touch away. The Atlas+APC is especially easy to configure using its state-of-the-art V4 controller.
An intuitive menu on the 7" marine-grade touch screen makes it easy to program the watermaker to automatically start, make water, run diagnostics, and perform a fresh water flush.
Once set up, the watermaking process completely touch-free.

The Atlas+APC's one-piece powder-coated aluminum frame is open to provide access for maintenance and inspection, and is only 31.6"L x 20.5"W x 18.2"D. It's extremely quiet and vibration-free, thanks to its quality components and advanced dual shock mounting system.

Importantly, FCI watermakers use only non-proprietary parts and components for low cost and ease of parts access worldwide.

FCI designs and manufactures all of their own equipment in-house - for optimum quality control, and to ensure you are getting the most reliable watermaker on the market today. As an owner, you can have confidence in knowing a company which has been in business for almost 30 years, and specializing in only watermakers, is here to support you.

Features —
• Marine grade 7" high resolution touch screen controller can operate at elevated temperatures
• Monitors are Bridge Classified (will not interfere with on-board electronics) for marine use with Type Approval Certifications from: ABS, GL, Lloyd’s Register EMEA, Det Norske Veritas, and the Russian Maritime Register of Shipping.
• 1 HP 316SS feed pump
• All models come standard with pleated polyblend 40 sq ft/5 micron commercial pre-filter
• Robust 316SS high pressure pump
• All models run on 3-phase 220V AC at 50-60 Hz
• Washdown duty motors (epoxy-coated, neoprene gaskets)
• Dual shockmounting
• Exclusive V4 control system
• Marine certified touch screen
• One-piece aluminum powder-coated frame construction
• Fully automatic operation with optional APC
• Entire series Is upgradeable to 3,600 GPD
• Made in the USA

Treat Questionable Dockside Freshwater —
Aquamiser+ Watermakers can be used with FCI's optional Dockside Treatment System (DTS) which allows using your watermaker to treat dockside water sources - which may be of questionable quality, or have high levels of dissolved solids.
(Using freshwater under high pressure during the watermaking process will permanently damage standard Reverse Osmosis membranes.)
The in-line DTS unit incorporates a separate set of freshwater-compatible membranes, but uses the watermaker's pumps and control panel, so you can produce high quality drinking water no matter where your boat is docked, and at minimal cost.
The resulting water also has the added benefit of having virtually no dissolved solids - making for spot-free deck and hull washdowns.