Stainless Steel Cruise 42 - Built-In

Cruise 42 Stainless Steel Refrigerator with Freezer

1.5 Cubic Foot • Front Opening Door • Refrigerator/Freezer

Availability: Make a selection

Sku# Make a selection
Item ID Make a selection
Mfg# Make a selection
loading image
Checking Your Price
Isotherm's Cruise series of refrigerator/freezer combo is a new exclusive range offering doors and interior details made of stainless steel and seated flush with an integrated door latch in the front.

The CR 42 has a 'back pack' compressor unit which can easily be removed and mounted anywhere up to 4.9 feet away from the unit in the vertical position, thus reducting the depth dimension by 6.38 inches.

• 1.5 cu. ft total volume
• Power consumption at 12V on average is 0.6A and at maximum is 2.7A
• Fitted with Danfoss compressor BD35F
• Freezer volume is 1 gallon at 21°F
• Cutout dimensions: 20.75"H x 15"W x 18.75"D (with compressor attached)
• 3-sided mounting flange extends 13/16" beyond the cutout on each side

Heavy on the technical side...
Electrical Power Sources
Indel's Isotherm refrigerators feature Secop (formerly Danfoss) compressor units, which come equipped with an electronic control module on rhe side. These modules are rated for either a DC Only power source, or for AC/DC power sources.

DC Only modules run on nominal 12 or 24 volts and have red and black wire leads which connect to the positive and negative terminals of your boat's batteries. A 15A ATC fuse for 12 volt systems (use 7.5A for 24 volts) and an ATC fuse holder are included. If an on/off switch is wired into the circuit, it should be rated for a minimum of 20 Amps.

AC/DC modules run on 12/24 volts DC and include wire leads, as above. They can also run on nominal 100 - 240 volts AC at 50 or 60 Hz. These AC/DC modules have two additional spade-style AC terminals for connecting the included 115 volt AC power cord (which has a two-push-on connectors at the refrigerator end, and a two-prong plug at the power source end).
If you want to run the refrigerator on European 230 volt or US 240 volt systems, you will need to provide your own power cord with a mains power plug which complies with applicable electrical safety regulations.
Note - Due to the double insulated design of the electronic unit, no earth connection is needed.

AC and DC power supplies can be connected to the electronic module at the same time. AC will be the preferred power supply source when both AC and DC power are available.

© Copyright Fisheries Supply Company 2013. All rights reserved.