Magnum Energy 4000W MSH-M Mobile Hybrid Source Inverter Charger - 24V Input, 120V AC Out
Magnum Energy 4000W MSH-M Mobile Hybrid Source Inverter Charger - 24V Input, 120V AC Out

3000W MSH-M Hybrid Inverter Charger - 12V, 120V AC

Run Loads From 2 Power Sources | Pure Sine Wave | 3000W Inverter, 125A Charger

Availability: Make a selection

Sku# Make a selection
Item ID Make a selection
Mfg# Make a selection
loading image
Checking for Price and Availability
The MSH-M (MagnaSine Hybrid-Mobile) Series Inverter/Charger from Magnum Energy is a pure sine wave inverter designed with true hybrid technology - allowing it to run larger loads from smaller generators.
Based on the popular MS Series pure sine wave inverter/charger, the MSH models add Hybrid technology and Load Support features.
Load Support allows incoming AC to synchronize with the inverter's AC output to allow using added power from your batteries to power larger loads. For example, a 4000 watt generator combined with a 4000 watt inverter could run a single 8000 watt AC load.

Two mobile models are available (3000W and 4000W) and are listed to UL458/CSA with neutral ground switching and 60A pass-through.
This entry features the 3000W model.

Hybrid technology: Most inverters only use one source of energy to power loads — either incoming AC power (shore power or AC generator), or from the batteries.
The MSH-M Series combines the energy from both sources to power loads.
This allows the inverter to recharge the batteries when there is surplus power, or to deliver more power to the loads if they require more than the AC input can supply by itself.

Load support: Load support parallels the inverter output from your batteries with any incoming AC sources - allowing it to run larger loads from smaller generators.

The MSH series of inverters is completely interchangeable with MS inverters from Magnum Energy, which means you can simply swap out inverters and the newer hybrid inverter will work with the Magnum accessories already installed — a compelling reason to upgrade.

Older remote control software revisions will work with the MSH-M Series. However, to view the Load Support status feature on the remote, the following remote control revisions are required: ME-RC = Revision 2.7, ME-ARC = Revision 3.0

• Pure sine wave AC power from your batteries
• Easy-to-install
• The MSH-M Series comes in 12 and 24 volt configurations
• 125A battery charger
• Lightweight aluminum base and cover provides noise reduction and corrosion resistance
• Multiple ports available
• Accessible design - extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be
• Convenient switches
• The MSH-M Series is backed by a three-year (36-month) limited warranty

Manufacturer Resources

© Copyright Fisheries Supply Company 2013. All rights reserved.