42C PULL MODULATOR ASSEMBLY 48IN
Temperature Modulator Valve
Elevated Temperature Modulated Assemblies and Cables
Share THIS PAGE:

Elevated Temperature Modulator Valve Transmission Control Assembly with Cable

Diesel Engines and Allison Automatic Transmissions

Availability: Make a selection

Sku# Make a selection
Item ID Make a selection
Mfg# Make a selection
loading image
Checking Your Price
Overview
If using a diesel engine with an automatic transmission, the fourth component of your Teleflex Morse control system is the Modulator.
The transmission modulator monitors engine rpm and throttle position to determine when the transmission should shift.

The Teleflex Morse Modulator valve control assembly consists of a modulator valve control and modulator cable.

Designed to work at higher temperatures, elevated temperature modulator assemblies are applicable for maximum temperatures of 250°F sustained, or 325°F intermittent.

Design considerations:
The Modulator Valve Control is designed for 21mm to 30mm maximum travel. Operating force required to actuate modulator assembly is approximately 5 to 6 pounds at maximum linear travel of 38mm.
The assembly is supplied in a push or pull to operate configuration.
A slip link must be installed to allow the fuel control lever and accelerator system to return to the idle position.

Click here for additional information and technical data about this product.
 
 
 
 
 
 
 

© Copyright Fisheries Supply Company 2013. All rights reserved.
Host-Name:410506-FISHERIE