Description
The compact and efficient Nomad in-line electric fuel heater is plumbed into the fuel line upstream from the filters.
An optional thermostatically controlled valve allows fuel to bypass the heater once the fuel has reached operating temperature.
Depending on the fuel flow rate, an 89°F heat rise is possible.
The Nomad heater can be operator controlled, or used with an aviailable optional shut off thermostat.
• Provides fuel system pre-heating and warm up
• Available in 300 and 500 Watts
• Compact size, only 3.8"H x 5.8"W x 5.4"D
• No moving parts, nothing to corrode
• Installation usually takes about an hour
• An optional frame rail mounting bracket eliminates drilling and welding
• Alternator rating in spec table assumes moderate additional current draw for lights, blowers, etc. Use of more accessories will require a higher rating