ProLine Tether - Attachment Loop, 1 ProSnap Hook, Flat Webbing (0.8m)

The hallmarks of Wichard's range of four "ProLine" safety tethers are the use of extra-wide mouth ProSnap safety snap hooks equipped with the ErgoLockSystem which automatically closes and locks the snap hook, an overload indicator with built-in shock absorber, lightweight construction and replaceable webbing.
Additionally, each ProLine tether complies with ISO 12401:2009 and ISAF safety regulations (OSR).

This #7032 short, flat webbing Proline safety tether has a loop at one end which you attach to your harness via a girth hitch, and a ProSnap double-action safety hook for attaching to an anchor point or jack line on the boat.
Length is just over 2-1/2 ft (0.8 meters).

Note that the ISO 12401:2009 Standard does not recommend the use of this #7032 tether for users over 50 kg (110 lb).

• ErgoLock System (patented): automatically closes and locks the snap hook
• Locking indicator
• Retro-reflective webbing, visible at night
• Overload indicator (as per ISAF offshore special regulations)
• Easy opening snap hook for one-handed operation
• Patented hookless "V-Nose" special tip makes hooking and unhooking easy with no catching or snagging
• Wide opening snap hook mouth (26 mm)
• Compact light tether
• Removable snap hook lets you increase the lifespan of the tether by replacing the webbing only
• Compliant with ISO 12401:2009 and ISAF regulations (OSR)
• Snap hooks are forged in special aluminum to ensure excellent rustproof qualities and minimum weight
• Webbing absorbs very little water and dries quickly

Instead of attaching to your harness, optionally, the attachment loop of this single leg #7032 ProLine 0.8 meter tether can be girth hitched to the "Smart Loop" of a #7031 single leg tether to create a 2-leg tether (equivalent to the #7034 tether).
Refer to page 2 of the linked Data Sheet for illustrations and further details.