Maretron Fuel Flow Sensor, M2AR - 25 LPH to 500 LPH (6.6 GPH to 132 GPH)
SKU: 1015419 Item ID: MRT M2AR
- For use with FFM100
Description
When fluid passes through the sensor, the rotors turn. Magnets which are located in the rotors will pass across sensors in the sensor circuit board. Pulses from these sensors are transmitted to the FFM100 which performs flow rate calculations based on the received pulses.
Specifications
MFG #:M2AR
| Unit - Flow RangeM2AR - 25 LPH to 500 LPH (6.6 GPH to 132 GPH)
Unit
M2AR
Flow Range
25 LPH to 500 LPH (6.6 GPH to 132 GPH)
Nominal K Factor
400 Pulses/L (1514.2 Pulses/G)
Operating Temp
-40°C to 80°C (-40°F to 176°F)
Storage Temp
-65°C to 170°C (-85°F to 338°F)
Port Size
1/4" NPT Female
Housing Material
Aluminum
Rotor Material
PPS (Ryton)
Shaft Material
316/304 Stainless Stee
Magnet Material
Samarian Cobalt
O-ring Material
FKM (Viton)
Accuracy % Reading
±0.25%
Max Viscosity
1000 cPs
Max Operating Pressure
68.95 Bar (1000 PSI
Strainer Size
200 Mesh
Cable Length
1m (3.28 ft)
Weight
755g (1.66 lb)
Dimensions
75 x 71 x 48.6 mm (2.9" x 2.8" x 1.9")
Warning
This item may be known to the State of California to cause cancer, birth defects, or other reproductive harm.
Barcode
873804003535