1IN CTS BRASS 45 DEG UNION ELBOW
45 Series Brass Quick Connect Plumbing System
1IN CTS BRASS UNION ELBOW
1INX3/4INX1IN CTS BRASS RED. TEE
1INX3/4IN CTS BRASS RED. UNION ELBOW
1IN CTS BRASS STACKABLE ELBOW
1IN CTS BRASS END STOP
1IN CTS BRASS 45 DEG STACK ELBOW
1IN CTS BRASS 45 DEG UNION ELBOW
3/4INX3/4IN CTS BRASS DROP EAR ELBOW
1IN CTS BRASS UNION TEE
1INX3/4IN CTS BRASS REDUCING UNION
1IN CTS BRASS UNION CONNECTOR
1INX1INX3/4IN CTS BRASS REDUCING TEE
1INX3/4INX3/4IN CTS BRASS RED. RUN TEE
1IN X 1IN CTS BRASS MALE CONNECT.
1IN X 1IN CTS BRASS FEMALE CONNECT.
Share THIS PAGE:

45 Series Brass Quick Connect Plumbing System

Snap-Together Modular Plumbing Fittings
By: SeaTech

Availability: Make a selection

Sku# Make a selection
Item ID Make a selection
Mfg# Make a selection
loading image
Checking Your Price
Overview
For those who find comfort in the use of metal fittings, Sea Tech's 45 Series of brass quick connect plumbing fittings offer all the advantages and features of Sea Tech's other fittings series. These are heavy duty brass fittings approved for both domestic and commercial applications. Ideal for outdoor plumbing systems such as docks and marinas. Can be used with CPVC, copper, or PEX tubing. A reliable, high quality, cost effective plumbing system; you can plumb an entire boat or house without any tools except a tape measure and tubing cutter in an amazingly short period of time compared to conventional plumbing systems.
• Meets a variety of building and plumbing codes for domestic use, including FDA, ASTM F877, ANSI/NSF-61 and NSF-14, ISO 9001 and the NSF-Uniform Plumbing Code
• Fittings rated to 250psi at 75°F and 200psi at 180°F
• Exclusive patent pending O-ring guide properly aligns O-ring seal and prevents O-ring damage and dislodging during installation
• Maximized flow rates since fittings connect on the outside of the tubing
• Fittings can rotate while under pressure without scoring
• Stainless steel gripping teeth in collet allow for use with tubing of different materials such as copper tubing, CPVC, polybutylene, etc.
• Components can be disconnected and reused without tools by simply pushing in on the (lockable) collet
• SeaTech female swivel connectors utilize a nut with NPS straight threads and a cone seal; this allows the installer to thread onto NPT, NPS, BSP and most 1/2" male threads without tools
• Note: Although these fittings are described by their nominal Copper Tubing Size (CTS) by Sea Tech, Fisheries Supply has chosen to use the more functional Outside Diameter (OD) in describing these fittings. Any appropriate tubing, with the OD specified in the table below can be used with these fittings
In the Table, the type of fitting is described then, after the “-”, the parts which are connected are named
 
 
 
 
 
 
 

© Copyright Fisheries Supply Company 2013. All rights reserved.
Host-Name:410506-FISHERIE