RBD201⁄202 - Swim Step Mount Double Arc Davit Kit

RBD201/202 Swim Step Mount

The Ulimate in Support for Heavy Inflatables with Motors

Availability: Make a selection

Sku# Make a selection
Item ID Make a selection
Mfg# Make a selection
loading image
Checking Your Price
This is a complete davit set-up allowing you to attach and raise a heavy, 10 to 12 ft inflatable dinghy to the swim platform. Instead of attaching to patches glued to the inflatable tubes, the stainless steel arcs curve around the tubes and attach to rigid points on the dinghy.
• Use for inflatables with a total weight not exceeding 300 lb
• Only for hard bottom inflatables (RIBs)
• Includes Front Arc w/3 glue-on Pads, 2 RS110 Snap Davit Heads, and a Transom Arc (select the Transom Arc size that you need for your dinghy)
• Front Arc attaches to three pads which are glued to the interior fiberglass hull of the inflatable; use Hypalon glue (Weaver 2001 series) or 3M™ 5200
• Size 1 Transom Arc - suitable for inflatables with 15" to 17" tubes having a transom 0 - 4" lower than the top of the tubes
• Size 2 Transom Arc - suitable for inflatables with 17" to 18" tubes having a transom 4 - 6" lower than the top of the tubes
• Both arcs remove and stow when the dinghy is in use; the front arc tripod mount remains, and is usually installed just behind a seat
• Made of 100% stainless steel
• Weaver lifetime guarantee; made in USA
• Recommended for use with Weaver Stand-Off Brackets to stow the dinghy securely, and standing off the transom, while underway

© Copyright Fisheries Supply Company 2013. All rights reserved.