977F Original Cubitron Abrasive Metalworking Belt

977F Original Cubitron Abrasive Metalworking Belt

2" x 72" • Pure Cubitron Abrasive on a YF Backing
By: 3M

Availability: Make a selection

Sku# Make a selection
Item ID Make a selection
Mfg# Make a selection
loading image
Checking for Price and Availability
One of 3M's top tier ceramic belts for stainless steel and high nickel alloys.

This belt features pure first generation Cubitron abrasive for — an incredibly hard and durable synthetic ceramic mineral with self-sharpening edges.
It consistently outperforms traditional aluminum oxide belts.
The backing is a YF-weight, water resistant polyester cloth.

• Works well in all grinding pressures
• Resin bonded for heat resistance
• Grinding aid for longer life, cooler running, and less loading
• Use wet or dry

How to Measure a Sanding Belt
Abrasive belts are always sized Width x Length (circumference).

To measure the Width of the belt:
1) Lay the belt on a flat surface and measure the width.

To measure the Length of the belt:
1) Make a small mark on the inside of the belt with a pen or marker
2) Make a corresponding mark on a large flat surface, benchtop or floor
3) Slowly roll the belt through a full rotation until the mark on the inside of the belt is once again touching the flat surface
4) Make a mark on the flat surface where it touches
5) Measuring between the 2 marks will give you the length of the belt

© Copyright Fisheries Supply Company 2013. All rights reserved.