Dry Layup Adhesive - Bulk

Dry Layup Adhesive - Bulk

Formulated for Vacuum Resin Infusion Layup Operations
By: 3M

Availability: Make a selection

Sku# Make a selection
Item ID Make a selection
Mfg# Make a selection
loading image
Checking for Price and Availability
3M Dry Lay-up Adhesive is a sprayable adhesive for holding glass fabrics and roving in place in the mold during the resin infusion process.
It features a visible red color for easy identification of spray quantities, wide spray pattern, and a fast, strong tack level for holding the heaviest fiberglass fabrics.

For the ultimate in ease of use, this bulk container adhesive should be sprayed with your shop air supply, using a 3M™ HGP Spray Gun — which utilizes disposable tips and cup liners for fast, easy cleanup and reduced solvent usage and disposal. See Related Products, below.
This bulk format can also be brushed or rolled.

• Synthetic elastomer-based adhesive
• Fast tacking
• High coverage
• Working time from 15 seconds to 15 minutes, depending on conditions
• Bulk container product can be sprayed with standard or 3M's HGP spray guns
• Do not brush or roll
• Clean with 3M™ Adhesive remover, toluene, or MEK
• Available in aerosol form; see Related Products, below
• Approx. coverage: 2,180 ft²/gallon @ 0.5 gm/ft² (dried weight)

Not VOC compliant.
Consult local state air quality regulations.

© Copyright Fisheries Supply Company 2013. All rights reserved.