2NM LED Anchor & Anchor/Strobe Navigation Lights

2NM LED All-Round Anchor Navigation Light

All-Round White Nav Light

Availability: Make a selection

Sku# Make a selection
Item ID Make a selection
Mfg# Make a selection
loading image
Checking for Price and Availability
This LED navigation light is a 2 nautical mile all-round/anchor light visibile to 2 NM producing light over 360 degrees utilizing a specially designed PMMA acrylic lens. It is suitable for vessels up to 164 ft (50m) in length and is designed for mounting on flat, horizontal surfaces.
The light comes standard with 3/4" thick K-lock HDPE Base Plate (not required - used for optional mounting scenarios).

These lights feature an extremely long service life, rugged aluminum block construction and are waterproof.

• LED (Light Emitting Diode) navigation light
• Round style for mounting on flat, horizontal surfaces such as poles, pedestals or mast-tops
• Optional high density PE base included for complete galvanic isolation
• K-Lock Base: A twist-lock system that connects the LED light and base together with a ¼-turn and then secured with a stainless set-screw
• LED is held in a PMMA (acrylic) lens that is the only 100% UV-stable transparent plastic in existence and ensures the light is guided through its defined 360° angle
• Rugged and unbreakable – precision CNC-machined anodized 6082 aluminium block housing protects the LED and electronics
• Not sensitive to vibration - no more broken filaments
• No bulb replacement, ever – lasts for approximately 50,000 hours (over 4,000 twelve hour nights)
• Completely waterproof and vibration-proof – interior is fully filled and sealed after initial testing with special silicon-epoxy potting resin
• Waterproof to IP 68+ (submersible to 350m)
• Low power consumption – 70% to 90% less than traditional incandescent navigation lights
• Internal electronics provide full required brightness over the entire voltage range (from 10 to 32 volts)
• Fixture is 3.64" in Diameter x 1.1"H; it comes with an optional Delrin® mounting base which adds 0.75" in height
• Side and bottom cable ports for versatile wiring options
• Factory-tested throughout the manufacturing process
• 5-year limited warranty

Lopolights that mount on horizontal surfaces (horizontal mounting) come with an included black Delrin® base, which is intended for fitting on site and may be drilled or shaped, if necessary, to fit your mounting surface.

To ensure that the light has the required intensity/visibility, each Lopo navigation light includes a microprocessor-controlled flashing signal. The micro-processor keeps track of how many hours the LED has been in use. When the light is first turned on, the signal flashes a code indicating either normal functioning, nearing end of service life, or 50,000 hours of use accomplished - time to replace. (50,000 hours is equivalent to over 4,000 twelve-hour nights.)

Manufacturer Resources

Whats In The Box
  • (1) Navigation light pre-cabled with 0,7 meter shielded marine grade cable
  • (1) K-Lock PE mounting base
  • (1) Installation Guide

© Copyright Fisheries Supply Company 2013. All rights reserved.