6500 Series Low Profile Half Facepiece Respirator

With a downdraft exhaust and a very low profile, this is the perfect respirator for welders, or anyone who needs a separate faceshield and respiratory protection at the same time.

The downdraft exhaust directs exhaled air downward, preventing the welding lens from fogging.

Lower profile than the 6000 or 7500 Series — leaves more room underneath a welding helmet or faceshield.

A long-life, silicone faceseal provides comfort and stability with a soft, but firm, faceseal.
Silicone faceseals are extremely popular for their superior all-day comfort.

• Low profile design increase field of view, and easily fits under helmets and faceshields
• 3M’s lightest weight facepiece with a silicone faceseal
• Mud flap style exhaust valve opens easier and reduces heat and moisture buildup
• Silicone faceseal keeps its shape in high heat environments
• Adjustable head harness for a comfortable fit
• Easier to clean - fewer parts and internal crevices

The 6500 Series facepiece respirator can be used with any of 3M's vapor cartridges, particulate filters, or catrridge/filter combinations for use in a variety of work environments.
Vapor cartridges are simply twisted on or off the facepiece bayonet fittings for easy replacement.
Particulate filters can be also attached, with or without vapor cartridges, and may require the use of adaptors.

Every 3M™ facepiece respirator can be used with any of 3M's vapor cartridge and particulate filter combinations:
• All vapor cartridges attach directly to the bayonet fitting on the facepiece
• All oblong particulate filters can be attached over a vapor cartridge by using a #501 adapter/holder, which snaps onto the cartridge
• All oblong particulate filters can also be used alone on a facepiece (without using a vapor cartridge), by attaching a #603 adapter to the bayonet fitting, placing an oblong filter on it, and using a #501 holder to hold it in place. Do this when vapor protection is NOT required, and only particulate protection is necessary
• All round particulate filters can also be attached to a vapor cartridge, but for round filters use the #502 bayonet adapter, which also just snaps onto the cartridge
• All round particulate filters can also attach directly to the bayonet fitting on the facepiece (without using a vapor cartridge), when vapor protection is NOT required, and only particulate protection is necessary

Note that vapor cartridges are almost always used in conjunction with filters — as in the marine industry, it is rare to be exposed to vapors without the presence of particulates.