One of 3M's top tier ceramic belts for stainless steel and high nickel alloys.
This belt features pure first generation Cubitron abrasive for — an incredibly hard and durable synthetic ceramic mineral with self-sharpening edges.
It consistently outperforms traditional aluminum oxide belts.
The backing is a YF-weight, water resistant polyester cloth.
• Works well in all grinding pressures
• Resin bonded for heat resistance
• Grinding aid for longer life, cooler running, and less loading
• Use wet or dry
How to Measure a Sanding Belt
Abrasive belts are always sized Width x Length (circumference).
To measure the Width of the belt:
1) Lay the belt on a flat surface and measure the width.
To measure the Length of the belt:
1) Make a small mark on the inside of the belt with a pen or marker
2) Make a corresponding mark on a large flat surface, benchtop or floor
3) Slowly roll the belt through a full rotation until the mark on the inside of the belt is once again touching the flat surface
4) Make a mark on the flat surface where it touches
5) Measuring between the 2 marks will give you the length of the belt
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm.
www.P65Warnings.ca.gov