Spray Fair 328 is an epoxy based, sprayable filler surfacer, and is the ideal product for yachts that require filling and fairing over large areas. It has superior application, sanding and anti-sagging properties. It is easy to mix and apply, and the cured film provides an excellent base for subsequent re-coating with other Alexseal topcoat products.
• For professional use only; consult Alexseal technical data sheets for best performance
• Apply over primed surfaces
• For above waterline use
• 2-color components to ensure proper mixing; color of sprayed mixture is tan
• Theoretical coverage is 22 ft²/gallon at a dry film thickness of 36 mils
A Reducer (R3040) is available, which may be required depending on the application conditions. See Data Sheet and Related Products.
Alexseal Spray Fair 328 is porous. It must be sealed with Alexseal Super Build 302 before applying a final primer or topcoat.
Alexseal Super Build 302 can be applied after the surface has been fully cured and block sanded with 80 to 120 grit abrasive. Finishing the fairing by block sanding with 80-120 grit or finer will help prevent sand scratch print-through in the final finish.
NOTE — Spray Fair 328 is a two part product, with each component sold separately. Make sure you purchase the both the base and the converter. See Related Products, below.
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm.
www.P65Warnings.ca.gov