It is highly uncommon for this module to sustain damage, as it is electronically safeguarded against impact through the motor's controller. Carrying a spare is advisable only if you anticipate using it for more than 100 hours during an extended cruise. A notable increase in noise and vibration serves as an indication that the module requires replacement.
• High aspect-ratio glass-filled Nylon propeller
• 13" diameter
• 9" pitch
• 0.3 lb.
To replace, remove the brass cotter pin and prop cap, then the prop/gear module can be removed. Assembly is the reverse operation. Important note: Grease and oil will inhibit the normal flow of water so do not apply mineral or synthetic lubricants when replacing this module.
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm.
www.P65Warnings.ca.gov