12V CRW400 Captive Reel Rope Windlass - 600 lb Max. Pull for Boats to 27 ft, 12V

An ideal windlass for bass and smaller pontoon boats, Lewmar's CRW400 represents an innovative transformation in engineering and design for small boat windlasses.
The CRW400 is built around a drum-wound rope anchor rode, and incorporates a unique "level wind" mechanism so the rode is always stowed neatly on the drum, ensuring tangle-free anchoring and maximum stowage capacity every time.
Neat and clean. No need for a locker, or having to deal with messy, wet coils of line on the deck!

In addition, the windlass features a "Load-Sense" safety feature - which prevents the unit from paying out line unless there is a pull on the anchor rode - typically from the weight of the anchor. This feature also allows for effective "drift" fishing.
An "Auto-Stop" feature utilizes a magnet embedded in the supplied anchor rode to ensure that a safe number of wraps always remains on the drum when anchoring in deep water.

Controls are right where you need them — an integrated Up/Down switch is located at the rear of the housing, together with a circuit breaker reset button.
A clear window in the front of the housing allows you to observe the functioning of the windlass, with no risk of trapping fingers or clothing in the winding drum.
With a stainless steel chassis, composite bearings and gearing technology, and a strong UV-stabilized ABS shell, the CRW400 is highly corrosion resistant, and well-suited for use in saltwater applications.

• Suitable for light displacement boats up to 27 ft in length, and anchors to 40 pounds
• Rode stowage without the need for a locker, freeing that space for another use
• Level-wind technology prevents overrides and bunching
• Windlass is supplied with 115 ft of 1/4" rode
• Maximum rode retrieval speed is a fast 82 ft/min
• Self locking - no need for a cleat or chain stopper
• Robust acetal plastic worm drive powers the rode slider arm in synchronization with the motor, neatly laying the rode on the drum
• Heavy duty composite gears transfer the power of the 400W motor via the main shaft to the moving slider arm mechanism
• Minimum recommended deck thickness is 1" (25mm); supplement with a suitable backing plate, if necessary
• CE approved
• Limited 3-year warranty

Click here for additional information about this product.