EZ-Tex Marine Epoxy Repaire Kit - 4 oz, White

EZ-Tex is an easy to use marine epoxy repair compound for use where a high strength, waterproof, permanent repair is needed.

This unique formula creates a tenacious bond to most surfaces - including fiberglass, gelcoat, aluminum, steel, bronze, and wood.
Its buttery consistency will not sag or shrink and is excellent for filling cracks, gouges and voids.
The 1:1 ratio makes mixing easy.
EZ-Tex can be sanded, drilled, tapped, sawed and painted once cured.

EZ-Tex uses —
• Protect core materials in decking by creating a waterproof barrier during installations of thru-hull fittings, transducers, cleats, deck fittings, bow rails, hatches, etc.
• Create waterproof repairs on metals such aluminum jon boats and pontoons
• Fill stripped screw holes and areas where hardware has been pulled out or removed.
• Drill and tap repair once hardened
• Use in blister repair to fill large voids without sagging or shrinking
• Fill unwanted cracks in fiberglass, wood, and other materials - can be easily painted when cured

Features —
• Easy to use 1:1 mix ratio repair compound for cracks, gouges, voids and holes
• Both components are the same consistency - makes for easy measuring and mixing
• High strength formula makes repairs permanent
• 100% waterproof when cured
• Can be used above and below the waterline
• Will not sag, shrink or run
• Max. working temp once cured is 150°F
• Available in 4 oz and 16 oz kits


Heavy on the technical side...
(At 50°F)
• Pot Life - 2 hr
• Gel Time - 4.5 hr
• Cure Time - 24 hr

(At 70°F)
• Pot Life - 60 min
• Gel Time - 90 min
• Cure Time - 5.5 hr

(At 90°F)
• Pot Life - 45 min
• Gel Time - 65 min
• Cure Time - 3.5 hr